Sensor / Actuator Connectors
Op aanvraag
Vraag product aanPrijzen excl. BTW en excl. verzendkosten
Verzonden in 1 tot 3 werkdagen
Artikelnummer:
RSWT 4-RKWT 4-646/3M
Fabrikantnummer:
600006880
Merk:
Lumberg Automation
Minimale bestelhoeveelheid:
1
Productinformatie
Deze set Sensor / Actuator Connectors omvat een dubbelzijdige M12 Standard cordset, ontworpen voor efficiënte en betrouwbare verbindingen in industriële toepassingen. Het beschikt over hoekige mannelijke naar hoekige vrouwelijke connectors, elk met vier polen, wat zorgt voor een stevige en veilige pasvorm. Deze connectors zijn geschikt voor 250 V en 4 A, waardoor ze geschikt zijn voor verschillende sensor- en actuatoropstellingen. De cordset is uitgerust met een duurzame grijze PVC-kabel (22 AWG), die flexibiliteit en slijtweerstand biedt, wat zorgt voor langdurige prestaties. Ideaal voor gebruik in geautomatiseerde machines en systemen, biedt deze connectorset een robuuste oplossing voor het overbrengen van signalen en stroom tussen sensoren en actuatoren.
Specificaties
| Opmerking vermogensreductie: | Notice derating |
|---|---|
| Opmerking, zijde 2: | Do not connect or disconnect under load. |
| Aantal pinnen: | 4 |
| Aantal pinnen, zijde 2: | 4 |
| Aantal draden: | 4 |
| O-ringmateriaal, zijde 2: | FKM, green or black |
| Oliebestendigheid: | Good chemical and oil resistance |
| Bedrijfsspanning: | 230 V AC/DC |
| Overvoltage Category: | II acc. to DIN EN 60664-1 (VDE 0110-1) |
| Overspanningscategorie, zijde 2: | II acc. to DIN EN 60664-1 (VDE 0110-1) |
| Artikelnummer (#1): | 600006880 |
| Nominale impuls-spanning: | 2.5 kV |
| Nominale spanning: | 250 V |
| RoHS-conform: | yes |
| Afscherming: | Unshielded |
| Type contact / Geslacht: | Male |
| Type contact / Geslacht, zijde 2: | Female |
| UL-keurmerk: | |
| UL-kabeltype: | AWM 2661, C(RU) AWM I/II A/B |
| UL-bestand: | E315587 |
| VDE-keurmerk: | |
| Nominale stroom*: | 4 A |
| Vervuilingsgraad: | 3 acc. to DIN EN 60664-1 (VDE 0110-1) |
| Vervuilingsgraad, zijde 2: | 3 acc. to DIN EN 60664-1 (VDE 0110-1) |
| Productfamillie: | Sensor / Actuator Connectors |
| Productsubfamilie: | M12 Standard |
| Productsubfamilie, zijde 2: | M12 Standard |
| Opmerking beschermingsgraad / IP-classificatie: | Protection Degree and IP Rating per test standard IEC 60529 using a Lumberg Automation mating product |
| Beschermingsgraad / IP-classificatie**: | IP65, IP67 |
| Beschermingsgraad / IP-classificatie, zijde 2**: | IP65, IP67 |
| Draadisolatiemateriaal: | PVC-SR |
| Omgevingstemperatuur (drag chain installatie): | - 15 to 105°C |
| Codering: | A |
| Codering, zijde 2: | A |
| Geleidergrootte: | 22 AWG |
| Geleidermateriaal: | Cu [Bare Copper] |
| Connectorontwerp: | Angled |
| Connectorontwerp, zijde 2: | Angled |
| Connectortype: | Cordset, double ended |
| Contact basismateriaal (#1): | CuSn |
| Contact basismateriaal, zijde 2: | CuSn |
| Kleur contacthouder: | Orange |
| Kleur contacthouder, zijde 2: | Orange |
| Materiaal contacthouder (#1): | TPU |
| Materiaal contacthouder, zijde 2: | TPU |
| Contactcoating: | Cu/Au |
| Kabelnummer: | 646 |
| Kabellengte: | 3 m |
| Omgevingstemperatuur (vaste installatie): | - 40 to 105°C |
| Omgevingstemperatuur (flexibele installatie): | - 15 to 105°C |
| Omgevingstemperatuur (bedrijf)*: | - 40 °C - + 90 °C |
| Omgevingstemperatuur (bedrijf), zijde 2*: | - 40 °C - + 90 °C |
| Bevestigingsmateriaal: | CuZn, Nickel-plated, External thread |
| Bevestigingsmateriaal, zijde 2: | CuZn, Nickel-plated, Internal thread |
| Bevestigingstype: | Coupling Screw |
| Bevestigingstype, zijde 2: | Coupling Thread |
| Kabeleigenschappen: | Mechanical Resistances, Abrasion, Impact, Weathering; Chemical Resistances to Oils, Acids, Alkalis |
| Kabeldiameter D: | Ø 5.10 mm |
| Kleur kabelmantel: | Grey |
| Materiaal kabelmantel: | PVC |
| Contactcoating, zijde 2: | Cu/Au |
| Contactweerstand: | ≤ 10 mOhm |
| Geïsoleerde draaddiameter: | Ø 1.25 mm |
| Isolatieweerstand: | ˃ 10^9 Ohm |
| Isolatieweerstand, zijde 2: | ˃ 10^9 Ohm |
| Artikelomschrijving: | RSWT 4-RKWT 4-646/3M |
| Lange omschrijving (#1): | Sensor / Actuator Connectors: Cordset, double ended, M12 Standard, Angled Male, 4-pole to a, M12 Standard, Angled Female, 4-pole, 250 V | 4 A; with Grey PVC 22 AWG cable |
| Koppelcycli: | ≤ 100 |
| Koppelcycli, zijde 2: | ≤ 100 |
| Minimale buigradius (vaste installatie): | ˃ 7 x D |
| Minimale buigradius (flexibele installatie): | ˃ 10 x D |
| Vormdeelkleur: | Grey Transluscent |
| Vormdeelkleur, zijde 2: | Grey Transluscent |
| Vormdeelmateriaal: | TPU |
| Contactweerstand, zijde 2: | ≤ 10 mOhm |
| Buigcycli: | ˃ 1 M |
| Ontwerpstandaard: | IEC 61076-2-101 |
| Ontwerpstandaard, zijde 2: | IEC 61076-2-101 |
| Aandraaimoment (bevestiging): | M 12x1: (50-60) Ncm, hand-tight |
| Aandraaimoment (bevestiging), zijde 2: | M 12x1: (50-60) Ncm, hand-tight |
| Brandbaarheidsklasse (kabelmantel): | UL VW-1, FT1 |
| Brandbaarheidsklasse (contacthouder): | UL 94 HB |
| Brandbaarheidsklasse (contacthouder), zijde 2: | UL 94 HB |
| Brandbaarheidsklasse (vormdeel): | UL 94 HB |
| Brandbaarheidsklasse (vormdeel), zijde 2: | UL 94 HB |
| Vormdeelmateriaal, zijde 2: | TPU |
| Uniek Nr.: | aut600006880 |