Sensor / Actuator Connector
Op aanvraag
Vraag product aanPrijzen excl. BTW en excl. verzendkosten
Verzonden in 1 tot 3 werkdagen
Artikelnummer:
RSWT 3-659/2M
Fabrikantnummer:
600006324
Merk:
Lumberg Automation
Minimale bestelhoeveelheid:
1
Productinformatie
De Sensor / Actuator Connector is ontworpen voor veeleisende automatiseringsbehoeften en beschikt over een M12-standaard met een enkelzijdig, hoekig mannelijk ontwerp voor eenvoudige integratie. Uitgerust met drie polen ondersteunt deze connector tot 250 V en 4 A, waardoor hij geschikt is voor diverse industriële toepassingen. De bijgevoegde grijze PVC-kabel van 3x22 AWG zorgt voor duurzaamheid en flexibiliteit, en past in krappe ruimtes. Met een IP65- en IP67-beschermingsgraad biedt hij uitstekende weerstand tegen stof en water, waardoor hij ideaal is voor ruwe omgevingen. De contactmaterialen van CuSn met Cu/Au-plating zorgen voor minimale contactweerstand, waardoor de geleiding en betrouwbaarheid worden verbeterd.
Downloads
Specificaties
| Artikelnummer (#1): | 600006324 |
|---|---|
| Overvoltage Category: | II acc. to DIN EN 60664-1 (VDE 0110-1) |
| Vormdeelmateriaal: | TPU |
| Vormdeelkleur: | Grey Transluscent |
| Minimale buigradius (flexibele installatie): | ˃ 10 x D |
| Minimale buigradius (vaste installatie): | ˃ 7 x D |
| Koppelcycli: | ≤ 100 |
| Opmerking vermogensreductie: | Notice derating |
| Bedrijfsspanning: | 230 V AC/DC |
| Aantal draden: | 3 |
| Aantal pinnen: | 3 |
| UL-keurmerk: | |
| Type contact / Geslacht: | Male |
| Afscherming: | Unshielded |
| UL-kabeltype: | AWM 2661, C(RU) AWM I/II A/B |
| UL-bestand: | E315587 |
| Draadisolatiemateriaal: | PVC-SR |
| VDE-keurmerk: | |
| RoHS-conform: | yes |
| Producttype: | Assemblies & Patch cords |
| Productsubfamilie: | M12 Standard |
| Productfamillie: | Sensor / Actuator Connector |
| Vervuilingsgraad: | 3 acc. to DIN EN 60664-1 (VDE 0110-1) |
| Opmerking beschermingsgraad / IP-classificatie: | Protection Degree and IP Rating per test standard IEC 60529 using a Lumberg Automation mating product |
| Nominale spanning: | 250 V |
| Nominale impuls-spanning: | 2.5 kV |
| Nominale stroom*: | 4 A |
| Beschermingsgraad / IP-classificatie**: | IP65, IP67 |
| Kleur contacthouder: | Orange |
| Kabelnummer: | 659 |
| Kabellengte: | 2 m |
| Codering: | A |
| Contact basismateriaal (#1): | CuSn |
| Connectortype: | Cordset, single ended |
| Connectorontwerp: | angled |
| Geleidermateriaal: | Cu [Bare Copper] |
| Geleidergrootte: | 22 AWG |
| Materiaal kabelmantel: | PVC |
| Kleur kabelmantel: | grey |
| Omgevingstemperatuur (flexibele installatie): | - 15 to 105°C |
| Omgevingstemperatuur (vaste installatie): | - 40 to 105°C |
| Omgevingstemperatuur (drag chain installatie): | - 15 to 105°C |
| Omgevingstemperatuur (bedrijf)*: | - 40 °C - + 90 °C |
| Kabeldiameter D: | Ø 4.82 mm |
| Kabeleigenschappen: | Mechanical Resistances, Abrasion, Impact, Weathering; Chemical Resistances to Oils, Acids, Alkalis |
| Bevestigingstype: | Coupling Screw |
| Bevestigingsmateriaal: | CuZn, Nickel-plated, External thread |
| Lange omschrijving (#1): | Sensor / Actuator Connector: M12 Standard, Cordset, Single ended, Angled Male, 3-pole, 250 V | 4 A; with Grey PVC 3x22 AWG cable |
| Brandbaarheidsklasse (vormdeel): | UL 94 HB |
| Brandbaarheidsklasse (contacthouder): | UL 94 HB |
| Artikelomschrijving: | RSWT 3-659/2M |
| Isolatieweerstand: | ˃ 10^9 Ohm |
| Geïsoleerde draaddiameter: | ø 1.25 mm |
| Brandbaarheidsklasse (kabelmantel): | UL VW-1, FT1 |
| Contactweerstand: | ≤ 10 mOhm |
| Contactcoating: | Cu/Au |
| Materiaal contacthouder (#1): | TPU |
| Buigcycli: | ˃ 1 M |
| Aandraaimoment (bevestiging): | M 12x1: (50-60) Ncm, hand-tight |
| Ontwerpstandaard: | IEC 61076-2-101 |
| Uniek Nr.: | aut600006324 |