Ga naar de hoofdinhoud Ga naar de zoekopdracht Ga naar de hoofdnavigatie
usp icon Meer dan 50 jaar kennis en ervaring
usp icon Ruim 10.000 producten op voorraad
usp icon Snelle levering

Productinformatie

De M8 Standaard Sensor/Actuator Enkelzijdige Kabelset is ontworpen voor betrouwbare connectiviteit in automatiseringstoepassingen. De vrouwelijke connector is recht en heeft 5 pinnen, B-gecodeerd voor verbeterde prestaties. De behuizing van de connector is transparant, wat visuele inspecties eenvoudig maakt. Deze kabelset is geschikt voor 50 V AC/60 V DC en 4 A, waarmee het zowel stroom- als signaaloverdracht effectief verzorgt. De zwarte kabel is gemaakt van duurzaam PUR-materiaal en heeft 5 draden van elk 0,34 mm² voor sterke elektrische prestaties. De robuuste constructie voldoet aan IEC 61076-2-104 normen en biedt IP65, IP67 en IP69K bescherming tegen omgevingsinvloeden, wat zorgt voor een lange levensduur, zelfs onder zware omstandigheden.

Downloads

Specificaties

Draad kleur 05, zijde 1: grey
Draad kleur 04, zijde 1: black
Draad kleur 03, zijde 1: blue
Draad kleur 02, zijde 1: white
Draad kleur 01, zijde 1: brown
Artikelnummer (#1): 934841011
Overvoltage Category: II acc. to DIN EN 60664-1 (VDE 0110-1)
Opmerking: Do not connect or disconnect under load.
Vormdeelmateriaal: TPU
Vormdeelkleur: Translucent
Minimale buigradius (flexibele installatie): ˃ 10 x D
Minimale buigradius (vaste installatie): ˃ 5 x D
Koppelcycli: ≤ 100
Opmerking vermogensreductie: Notice derating
Bedrijfsspanning: 50 V AC / 60 V DC
Bedrijfstemperatuur (UL): max. + 75 °C
O-ringmateriaal: FKM, green
Aantal draden: 5
Aantal pinnen: 5
UL-keurmerk: UL 2238; cURus
Type contact / Geslacht: female
Afscherming: Unshielded
UL-kabeltype: AWM: 20549
UL-bestand: E315587
Draadisolatiemateriaal: PP
RoHS-conform: yes
Productsubfamilie: M8 Standard
Productfamillie: Sensor / Actuator Connectors
Vervuilingsgraad: 3 acc. to DIN EN 60664-1 (VDE 0110-1)
Opmerking beschermingsgraad / IP-classificatie: ** only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.
Nominale spanning (UL): 30 V AC/DC
Nominale spanning: 60 V
Nominale impuls-spanning: 0.8 kV
Nominale stroom*: 4 A
Nominale stroom (UL)*: 3 A
Beschermingsgraad / IP-classificatie**: IP65, IP67, IP69K
Kleur contacthouder: Orange
Kabelnummer: 293
Kabellengte: 20 m
Codering: B
Contact basismateriaal (#1): CuZn
Connectortype: Cordset, single ended
Connectorontwerp: straight
Geleidermateriaal: Cu
Geleidergrootte: 0.34 mm²
Materiaal kabelmantel: PUR
Kleur kabelmantel: black matt similarly RAL 9005
Omgevingstemperatuur (flexibele installatie): - 25 °C - + 90 °C (UL: + 80 °C)
Omgevingstemperatuur (vaste installatie): - 50 °C - + 90 °C (UL: + 80 °C)
Omgevingstemperatuur (drag chain installatie): - 25 °C - + 60 °C
Omgevingstemperatuur (bedrijf)*: - 40 °C - + 90 °C
Kabeldiameter D: ø 5.0 ± 0.20 mm
Kabeleigenschappen: Good microbes and hydrolysis resistance; Mainly plasticizer diffusion free; Exclusion of PVC and silicone; Free of lacquer wetting disturbing substances; Coldness flexibility
Bevestigingstype: Coupling Nut
Oppervlaktebehandeling bevestiging: Nickel-plated
Bevestigingsmateriaal: CuZn
Lange omschrijving (#1): M8 Standard Sensor/Actuator Single-Ended Cordset: Female, straight, 5-pin, B-coded, translucent body, 50 V AC / 60 V DC, 4 A; PUR black cable, 5-wires, 0.34 mm²
Halogeenvrij: DIN EN 50267-2-1, IEC 60754-1, VDE 0482-267-2-1
Brandbaarheidsklasse (vormdeel): UL 94 HB
Brandbaarheidsklasse (contacthouder): UL 94 V-0
Artikelomschrijving: RKMV 5-293/20 M
Isolatieweerstand kabel: min 1000 MOhm x km
Isolatieweerstand: ˃ 10^9 Ohm
Geïsoleerde draaddiameter: ø 1.30 ± 0.10 mm
Brandbaarheidsklasse (kabelmantel): DIN EN 60332-2-2, VDE 0482-332-2-2, IEC 60332-2-2, CSA FT-2
Contactweerstand: ≤ 10 mOhm
Contactcoating: Cu/Au
Materiaal contacthouder (#1): PA 66 GF
Buigcycli: ˃ 5 M
Aandraaimoment (bevestiging): M 8x1: 30 Ncm, hand-tight
Ontwerpstandaard: IEC 61076-2-104
Torsiecycli: ˃ 5 M @ ± 360 °/1 m
Uniek Nr.: aut934841011