Ga naar de hoofdinhoud Ga naar de zoekopdracht Ga naar de hoofdnavigatie
usp icon Meer dan 50 jaar kennis en ervaring
usp icon Ruim 10.000 producten op voorraad
usp icon Snelle levering

Productinformatie

De M8 Standaard Sensor/Actuator Enkelzijdige Aansluitsnoer biedt een betrouwbare oplossing voor sensor- en actuatorverbindingen. Met zijn vrouwelijke, rechte, 3-pins, A-gecodeerde ontwerp is deze snoer ontworpen om aan hoge industriële normen te voldoen. De ansluitsnoer heeft een transparante behuizing en is geschikt voor gebruik bij 50 V AC / 60 V DC en 4 A. De constructie bestaat uit een grijze PUR-kabel met drie aders van 0,34 mm². De milieubeschermingsklasses omvatten IP65, IP67 en IP69K, wat zorgt voor robuuste prestaties onder zware omstandigheden. De koppelschroef en vernikkelde CuZn-materialen verhogen de duurzaamheid en zorgen voor een veilige verbinding, waardoor het ideaal is voor diverse industriële toepassingen, waaronder automatiseringssystemen en sensornetwerken.

Downloads

Specificaties

Draad kleur 04, zijde 1: black
Draad kleur 03, zijde 1: blue
Draad kleur 01, zijde 1: brown
Artikelnummer (#1): 934636747
Overvoltage Category: III acc. to DIN EN 60664-1 (VDE 0110-1)
Opmerking: Do not connect or disconnect under load.
Vormdeelmateriaal: TPU
Vormdeelkleur: Translucent
Minimale buigradius (flexibele installatie): ˃ 10 x D
Minimale buigradius (vaste installatie): ˃ 5 x D
Koppelcycli: ≤ 100
Opmerking vermogensreductie: Notice derating
Bedrijfsspanning: 50 V AC / 60 V DC
Bedrijfstemperatuur (UL): max. + 70 °C
Oliebestendigheid: Good chemical and oil resistance
O-ringmateriaal: FKM, green
Aantal draden: 3
Aantal pinnen: 3
UL-keurmerk: UL 2238; cURus
Type contact / Geslacht: female
Afscherming: Unshielded
UL-kabeltype: AWM: 20549
UL-bestand: E315587
Draadisolatiemateriaal: PP
RoHS-conform: yes
Productsubfamilie: M8 Standard
Productfamillie: Sensor / Actuator Connectors
Vervuilingsgraad: 3 acc. to DIN EN 60664-1 (VDE 0110-1)
Opmerking beschermingsgraad / IP-classificatie: ** only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.
Nominale spanning (UL): 30 V AC/DC
Nominale spanning: 60 V
Nominale impuls-spanning: 1.5 kV
Nominale stroom*: 4 A
Nominale stroom (UL)*: 4 A
Beschermingsgraad / IP-classificatie**: IP65, IP67, IP69K
Kleur contacthouder: Orange
Kabelnummer: 264
Kabellengte: 10 m
Codering: A
Contact basismateriaal (#1): CuSn
Connectortype: Cordset, single ended
Connectorontwerp: straight
Geleidermateriaal: Cu
Geleidergrootte: 0.34 mm²
Materiaal kabelmantel: PUR
Kleur kabelmantel: grey matt similarly RAL 7001
Omgevingstemperatuur (flexibele installatie): - 25 °C - + 80 °C
Omgevingstemperatuur (vaste installatie): - 50 °C - + 80 °C
Omgevingstemperatuur (drag chain installatie): - 25 °C - + 60 °C
Omgevingstemperatuur (bedrijf)*: - 40 °C - + 90 °C
Kabeldiameter D: ø 4.30 ± 0.20 mm
Kabeleigenschappen: Good microbes and hydrolysis resistance; Mainly plasticizer diffusion free; Exclusion of PVC and silicone; Free of lacquer wetting disturbing substances; Coldness flexibility
Bevestigingstype: Coupling Nut
Oppervlaktebehandeling bevestiging: Nickel-plated
Bevestigingsmateriaal: CuZn
Lange omschrijving (#1): M8 Standard Sensor/Actuator Single-Ended Cordset: Female, straight, 3-pin, A-coded, translucent body, 50 V AC / 60 V DC, 4 A; PUR grey cable, 3-wires, 0.34 mm²
Halogeenvrij: DIN EN 50267-2-1, IEC 60754-1, VDE 0482-267-2-1
Brandbaarheidsklasse (vormdeel): UL 94 HB
Brandbaarheidsklasse (contacthouder): UL 94 HB
Artikelomschrijving: RKMV 3-264/10 M
Isolatieweerstand kabel: min 1000 MOhm x km
Isolatieweerstand: ˃ 10^9 Ohm
Geïsoleerde draaddiameter: ø 1.30 ± 0.10 mm
Brandbaarheidsklasse (kabelmantel): DIN EN 60332-2-2, VDE 0482-332-2-2, IEC 60332-2-2, CSA FT-2
Contactweerstand: ≤ 10 mOhm
Contactcoating: Cu/Au
Materiaal contacthouder (#1): TPU
Buigcycli: ˃ 5 M
Aandraaimoment (bevestiging): M 8x1: 30 Ncm, hand-tight
Ontwerpstandaard: IEC 61076-2-104
Torsiecycli: ˃ 5 M
Uniek Nr.: aut934636747