Ga naar de hoofdinhoud Ga naar de zoekopdracht Ga naar de hoofdnavigatie
usp icon Meer dan 50 jaar kennis en ervaring
usp icon Ruim 10.000 producten op voorraad
usp icon Snelle levering

Productinformatie

Het M8 Snap-In Sensor/Actuator Single-Ended Cordset is een hoogwaardige connector ontworpen voor diverse industriële toepassingen. Deze cordset heeft een vrouwelijke, haakse, 5-pins configuratie met B-codering en een translucente behuizing. Het ondersteunt een bedrijfsspanning van 50 V AC / 60 V DC en een stroomsterkte van 4 A. De aangehechte PVC-zwarte kabel heeft 5 draden en een geleiderdiameter van 0.34 mm², wat zorgt voor betrouwbare elektrische transmissie met minimale weerstand (≤ 10 mOhm) en hoge isolatieweerstand (˃ 10^9 Ohm). De cordset is niet afgeschermd, heeft een snap-vergrendeling, en voldoet aan de IEC 61076-2-104 ontwerpstandaard.

Downloads

Specificaties

Draad kleur 05, zijde 1: grey
Draad kleur 04, zijde 1: black
Draad kleur 03, zijde 1: blue
Draad kleur 02, zijde 1: white
Draad kleur 01, zijde 1: brown
Artikelnummer (#1): 934884006
Overvoltage Category: II acc. to DIN EN 60664-1 (VDE 0110-1)
Opmerking: Do not connect or disconnect under load.
Vormdeelmateriaal: TPU
Vormdeelkleur: Translucent
Minimale buigradius (flexibele installatie): ˃ 10 x D
Minimale buigradius (vaste installatie): ˃ 5 x D
Koppelcycli: ≤ 100
Opmerking vermogensreductie: Notice derating
Bedrijfsspanning: 50 V AC / 60 V DC
Bedrijfstemperatuur (UL): max. + 75 °C
Oliebestendigheid: Good chemical and oil resistance
Aantal draden: 5
Aantal pinnen: 5
UL-keurmerk: UL 2238; cURus
Type contact / Geslacht: female
Afscherming: Unshielded
UL-kabeltype: AWM: 2464
UL-bestand: E315587
Draadisolatiemateriaal: PVC
RoHS-conform: yes
Productsubfamilie: M8 Snap-In
Productfamillie: Sensor / Actuator Connectors
Vervuilingsgraad: 3 acc. to DIN EN 60664-1 (VDE 0110-1)
Opmerking beschermingsgraad / IP-classificatie: ** only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.
Nominale spanning (UL): 30 V AC/DC
Nominale spanning: 60 V
Nominale impuls-spanning: 0.8 kV
Nominale stroom*: 4 A
Nominale stroom (UL)*: 3 A
Beschermingsgraad / IP-classificatie**: IP65
Kleur contacthouder: Orange
Kabelnummer: 671
Kabellengte: 25 m
Codering: B
Contact basismateriaal (#1): CuZn
Connectortype: Cordset, single ended
Connectorontwerp: angled
Geleidermateriaal: Cu
Geleidergrootte: 0.34 mm²
Materiaal kabelmantel: PVC
Kleur kabelmantel: black
Omgevingstemperatuur (flexibele installatie): - 25 °C - + 90 °C (UL: + 80 °C)
Omgevingstemperatuur (vaste installatie): - 50 °C - + 90 °C (UL: + 80 °C)
Omgevingstemperatuur (drag chain installatie): - 25 °C - + 60 °C
Omgevingstemperatuur (bedrijf)*: - 40 °C - + 90 °C
Kabeldiameter D: ø 5.2 ± 0.20 mm
Kabeleigenschappen: Free of lacquer wetting disturbing substances; Good microbes and hydrolysis resistance; Mainly plasticizer diffusion free; Coldness flexibility
Bevestigingstype: Snap-Locking
Oppervlaktebehandeling bevestiging: Nickel-plated
Lange omschrijving (#1): M8 Snap-In Sensor/Actuator Single-Ended Cordset: Female, angled, 5-pin, B-coded, translucent body, 50 V AC / 60 V DC, 4 A; PVC black cable, 5-wires, 0.34 mm²
Halogeenvrij: DIN EN 50267-2-1, IEC 60754-1, VDE 0482-267-2-1
Brandbaarheidsklasse (vormdeel): UL 94 HB
Brandbaarheidsklasse (contacthouder): UL 94 V-0
Artikelomschrijving: RKMW 5-671/25 M
Isolatieweerstand kabel: min 10 MOhm x km
Isolatieweerstand: ˃ 10^9 Ohm
Geïsoleerde draaddiameter: ø 1.30 mm
Brandbaarheidsklasse (kabelmantel): DIN EN 60332-2-2, VDE 0482-332-2-2, IEC 60332-2-2, CSA FT-2
Contactweerstand: ≤ 10 mOhm
Contactcoating: Cu/Au
Materiaal contacthouder (#1): PA 66 GF
Buigcycli: ˃ 1 M
Ontwerpstandaard: IEC 61076-2-104
Uniek Nr.: aut934884006