M8 Snap-In Sensor/Actuator Single-Ended Cordset
€ 11,31
Prijzen excl. BTW en excl. verzendkosten
Verzonden in 1 tot 3 werkdagen
Artikelnummer:
RKMW 3-338/3 M
Fabrikantnummer:
88673
EAN:
04020841667893
Merk:
Lumberg Automation
Minimale bestelhoeveelheid:
10
Productinformatie
De M8 Snap-In Sensor/Actuator Single-Ended Cordset is ontworpen met een vrouwelijke, gehoekte 3-pins connector die A-gecodeerd is voor nauwkeurige connectiviteit. De doorschijnende behuizing biedt visuele inspectie van de aansluitingen, en ondersteunt 50 V AC / 60 V DC met een stroomsterkte van 2 A. Het robuuste ontwerp bevat een zwarte PUR-kabel met 3 draden van elk 0,14 mm², wat het ideaal maakt voor hoogwaardige industriële toepassingen. Deze connector is ongekleed en van het snap-locking type, wat installatiegemak en functionele veiligheid biedt. Geschikt voor operationele temperaturen tussen -40 °C en +90 °C, voldoet het aan de IEC 61076-2-104 norm, wat betrouwbaarheid en een lange levensduur verzekert, zelfs in zware industriële omgevingen. Deze set is in overeenstemming met verschillende veiligheid- en milieuregels, inclusief RoHS.
Downloads
Specificaties
| Draad kleur 04, zijde 1: | black |
|---|---|
| Draad kleur 03, zijde 1: | blue |
| Draad kleur 01, zijde 1: | brown |
| Artikelnummer (#1): | 88673 |
| Overvoltage Category: | III acc. to DIN EN 60664-1 (VDE 0110-1) |
| Opmerking: | Do not connect or disconnect under load. |
| Vormdeelmateriaal: | TPU |
| Vormdeelkleur: | Translucent |
| Minimale buigradius (flexibele installatie): | ˃ 10 x D |
| Minimale buigradius (vaste installatie): | ˃ 3 x D |
| Koppelcycli: | ≤ 100 |
| Opmerking vermogensreductie: | Notice derating |
| Bedrijfsspanning: | 50 V AC / 60 V DC |
| Bedrijfstemperatuur (UL): | max. + 70 °C |
| Oliebestendigheid: | Good chemical and oil resistance |
| Aantal draden: | 3 |
| Aantal pinnen: | 3 |
| UL-keurmerk: | UL 2238; cURus |
| Type contact / Geslacht: | female |
| Afscherming: | Unshielded |
| UL-kabeltype: | AWM: 20549 |
| UL-bestand: | E315587 |
| Draadisolatiemateriaal: | PP |
| RoHS-conform: | yes |
| Productsubfamilie: | M8 Snap-In |
| Productfamillie: | Sensor / Actuator Connectors |
| Vervuilingsgraad: | 3 acc. to DIN EN 60664-1 (VDE 0110-1) |
| Opmerking beschermingsgraad / IP-classificatie: | ** only if mounted and locked in combination with Hirschmann / Lumberg Automation connector. |
| Nominale spanning (UL): | 30 V AC/DC |
| Nominale spanning: | 60 V |
| Nominale impuls-spanning: | 1.5 kV |
| Nominale stroom*: | 2 A |
| Nominale stroom (UL)*: | 2 A |
| Beschermingsgraad / IP-classificatie**: | IP65 |
| Kleur contacthouder: | Orange |
| Kabelnummer: | 338 |
| Kabellengte: | 3 m |
| Codering: | A |
| Contact basismateriaal (#1): | CuSn |
| Connectortype: | Cordset, single ended |
| Connectorontwerp: | angled |
| Geleidermateriaal: | Cu |
| Geleidergrootte: | 0.14 mm² |
| Materiaal kabelmantel: | PUR |
| Kleur kabelmantel: | black |
| Omgevingstemperatuur (flexibele installatie): | - 25 °C - + 80 °C |
| Omgevingstemperatuur (vaste installatie): | - 50 °C - + 80 °C |
| Omgevingstemperatuur (drag chain installatie): | max. + 60 °C |
| Omgevingstemperatuur (bedrijf)*: | - 40 °C - + 90 °C |
| Kabeldiameter D: | ø 2.90 ± 0.15 mm |
| Kabeleigenschappen: | Good microbes and hydrolysis resistance; Mainly plasticizer diffusion free; Exclusion of PVC and silicone; Coldness flexibility |
| Bevestigingstype: | Snap-Locking |
| Lange omschrijving (#1): | M8 Snap-In Sensor/Actuator Single-Ended Cordset: Female, angled, 3-pin, A-coded, translucent body, 50 V AC / 60 V DC, 2 A; PUR black cable, 3-wires, 0.14 mm² |
| Halogeenvrij: | DIN EN 50267-2-1, IEC 60754-1, VDE 0482-267 |
| Brandbaarheidsklasse (vormdeel): | UL 94 HB |
| Brandbaarheidsklasse (contacthouder): | UL 94 HB |
| Artikelomschrijving: | RKMW 3-338/3 M |
| Isolatieweerstand kabel: | min 5000 MOhm x km |
| Isolatieweerstand: | ˃ 10^9 Ohm |
| Geïsoleerde draaddiameter: | ø 0.90 mm |
| Brandbaarheidsklasse (kabelmantel): | DIN EN 50265-2-2, VDE 0482-265-2-2, IEC 60332-2-2, CSA FT2 |
| Contactweerstand: | ≤ 10 mOhm |
| Contactcoating: | Cu/Au |
| Materiaal contacthouder (#1): | TPU |
| Buigcycli: | ˃ 2 M |
| Ontwerpstandaard: | IEC 61076-2-104 |
| Torsiecycli: | ˃ 2 M @ ± 270 °/10 cm |
| Uniek Nr.: | aut88673 |