Ga naar de hoofdinhoud Ga naar de zoekopdracht Ga naar de hoofdnavigatie
usp icon Meer dan 50 jaar kennis en ervaring
usp icon Ruim 10.000 producten op voorraad
usp icon Snelle levering

Productinformatie

De M8 Snap-In Sensor/Actuator Single-Ended Cordset is ontworpen met een vrouwelijke, haakse, 3-pins, A-gecodeerde, doorschijnende behuizing. Deze cordset werkt op 50 V AC / 60 V DC en ondersteunt tot 4 A stroom. Het beschikt over een duurzame oranje PVC-kabel met 3 draden en een geleidergrootte van 0,34 mm². De cordset garandeert betrouwbare verbindingen met een snap-lock mechanisme en biedt hoge weerstand tegen chemicaliën en olie. Het ontwerp voldoet aan IEC 61076-2-104 en is getest om te presteren bij temperaturen variërend van -40°C tot +90°C. De cordset is UL-gecertificeerd en RoHS-conform, wat het geschikt maakt voor verschillende industriële omgevingen die robuuste en veilige elektrische verbindingen vereisen.

Downloads

Specificaties

Draad kleur 04, zijde 1: black
Draad kleur 03, zijde 1: blue
Draad kleur 01, zijde 1: brown
Artikelnummer (#1): 11305
Overvoltage Category: III acc. to DIN EN 60664-1 (VDE 0110-1)
Opmerking: Do not connect or disconnect under load.
Vormdeelmateriaal: TPU
Vormdeelkleur: Translucent
Minimale buigradius (flexibele installatie): ˃ 10 x D
Minimale buigradius (vaste installatie): ˃ 5 x D
Koppelcycli: ≤ 100
Opmerking vermogensreductie: Notice derating
Bedrijfsspanning: 50 V AC / 60 V DC
Bedrijfstemperatuur (UL): max. + 70 °C
Oliebestendigheid: Good chemical and oil resistance
Aantal draden: 3
Aantal pinnen: 3
UL-keurmerk: UL 2238; cURus
Type contact / Geslacht: female
Afscherming: Unshielded
UL-kabeltype: AWM: 2464
UL-bestand: E315587
Draadisolatiemateriaal: PVC
RoHS-conform: yes
Productsubfamilie: M8 Snap-In
Productfamillie: Sensor / Actuator Connectors
Vervuilingsgraad: 3 acc. to DIN EN 60664-1 (VDE 0110-1)
Opmerking beschermingsgraad / IP-classificatie: ** only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.
Nominale spanning (UL): 30 V AC/DC
Nominale spanning: 60 V
Nominale impuls-spanning: 1.5 kV
Nominale stroom*: 4 A
Nominale stroom (UL)*: 4 A
Beschermingsgraad / IP-classificatie**: IP65
Kleur contacthouder: Orange
Kabelnummer: 006
Kabellengte: 10 m
Codering: A
Contact basismateriaal (#1): CuSn
Connectortype: Cordset, single ended
Connectorontwerp: angled
Geleidermateriaal: Cu
Geleidergrootte: 0.34 mm²
Materiaal kabelmantel: PVC
Kleur kabelmantel: orange
Omgevingstemperatuur (flexibele installatie): + 5 °C - + 90 °C (UL: + 80 °C)
Omgevingstemperatuur (vaste installatie): - 40 °C - + 90 °C (UL: + 80 °C)
Omgevingstemperatuur (drag chain installatie): + 5 °C - + 60 °C
Omgevingstemperatuur (bedrijf)*: - 40 °C - + 90 °C
Kabeldiameter D: ø 5.0 ± 0.2 mm
Kabeleigenschappen: Free of lacquer wetting disturbing substances; Exclusion of silicone
Bevestigingstype: Snap-Locking
Lange omschrijving (#1): M8 Snap-In Sensor/Actuator Single-Ended Cordset: Female, angled, 3-pin, A-coded, translucent body, 50 V AC / 60 V DC, 4 A; PVC orange cable, 3-wires, 0.34 mm²
Brandbaarheidsklasse (vormdeel): UL 94 HB
Brandbaarheidsklasse (contacthouder): UL 94 HB
Artikelomschrijving: RKMW 3-06/10 M
Isolatieweerstand kabel: min 10 MOhm x km
Isolatieweerstand: ˃ 10^9 Ohm
Geïsoleerde draaddiameter: ø 1.50 mm
Brandbaarheidsklasse (kabelmantel): DIN EN 60332-1-2, VDE 0482-332-1-2, IEC 60332-1-2, UL VW-1
Contactweerstand: ≤ 10 mOhm
Contactcoating: Cu/Au
Materiaal contacthouder (#1): TPU
Buigcycli: ˃ 1 M
Ontwerpstandaard: IEC 61076-2-104
Uniek Nr.: aut11305