Ga naar de hoofdinhoud Ga naar de zoekopdracht Ga naar de hoofdnavigatie
usp icon Meer dan 50 jaar kennis en ervaring
usp icon Ruim 10.000 producten op voorraad
usp icon Snelle levering

Productinformatie

De M8 Snap-In Sensor/Actuator Enkelzijdige Kabelset is een betrouwbare en duurzame connectiviteitsoplossing voor industriële omgevingen. Deze kabelset beschikt over een 3-pins, A-gecodeerde mannelijke connector met een transparante TPU-behuizing en werkt efficiënt bij 50 V AC / 60 V DC en verwerkt stromen tot 4 A. De PUR zwarte kabel bevat drie draden met een doorsnede van 0,34 mm², wat zowel flexibiliteit als stevigheid garandeert. Het ontwerp voldoet aan de IEC 61076-2-104 norm en biedt een veilige verbinding door middel van snap- en schroefsluitingsmechanismen. Met een hoge beschermingsgraad van IP65 bij aansluiting is deze kabelset ideaal voor gebruik onder uitdagende omstandigheden, met uitstekende weerstand tegen chemicaliën, oliën en omgevingsfactoren.

Downloads

Specificaties

Draad kleur 04, zijde 1: black
Draad kleur 03, zijde 1: blue
Draad kleur 01, zijde 1: brown
Artikelnummer (#1): 106938
Overvoltage Category: III acc. to DIN EN 60664-1 (VDE 0110-1)
Opmerking: Do not connect or disconnect under load.
Vormdeelmateriaal: TPU
Vormdeelkleur: Translucent
Minimale buigradius (flexibele installatie): ˃ 10 x D
Minimale buigradius (vaste installatie): ˃ 5 x D
Koppelcycli: ≤ 100
Opmerking vermogensreductie: Notice derating
Bedrijfsspanning: 50 V AC / 60 V DC
Bedrijfstemperatuur (UL): max. + 70 °C
Oliebestendigheid: Good chemical and oil resistance
Aantal draden: 3
Aantal pinnen: 3
UL-keurmerk: UL 2238; cURus
Type contact / Geslacht: Male
Afscherming: Unshielded
UL-kabeltype: AWM: 20549
UL-bestand: E315587
Draadisolatiemateriaal: PP
RoHS-conform: yes
Productsubfamilie: M8 Snap-In
Productfamillie: Sensor / Actuator Connectors
Vervuilingsgraad: 3 acc. to DIN EN 60664-1 (VDE 0110-1)
Opmerking beschermingsgraad / IP-classificatie: ** only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.
Nominale spanning (UL): 30 V AC/DC
Nominale spanning: 60 V
Nominale impuls-spanning: 1.5 kV
Nominale stroom*: 4 A
Nominale stroom (UL)*: 4 A
Beschermingsgraad / IP-classificatie**: IP65 (in combination with female M8 Snap-In connector); IP65, IP67 (in combination with female M8 Standard connector)
Kleur contacthouder: Orange
Kabelnummer: 224
Kabellengte: 0.9 m
Codering: A
Contact basismateriaal (#1): CuSn
Connectortype: Cordset, single ended
Connectorontwerp: straight
Geleidermateriaal: Cu
Geleidergrootte: 0.34 mm²
Materiaal kabelmantel: PUR
Kleur kabelmantel: black matt similarly RAL 9005
Omgevingstemperatuur (flexibele installatie): - 25 °C - + 80 °C
Omgevingstemperatuur (vaste installatie): - 50 °C - + 80 °C
Omgevingstemperatuur (drag chain installatie): - 25 °C - + 60 °C
Omgevingstemperatuur (bedrijf)*: - 40 °C - + 90 °C
Kabeldiameter D: ø 4.30 ± 0.20 mm
Kabeleigenschappen: Good microbes and hydrolysis resistance; Mainly plasticizer diffusion free; Exclusion of PVC and silicone; Free of lacquer wetting disturbing substances; Coldness flexibility
Bevestigingstype: Snap- and Screw-Locking
Oppervlaktebehandeling bevestiging: Nickel-plated
Bevestigingsmateriaal: CuZn
Lange omschrijving (#1): M8 Snap-In Sensor/Actuator Single-Ended Cordset: Male, straight, 3-pin, A-coded, translucent body, 50 V AC / 60 V DC, 4 A; PUR black cable, 3-wires, 0.34 mm²
Halogeenvrij: DIN EN 50267-2-1, IEC 60754-1, VDE 0482-267-2-1
Brandbaarheidsklasse (vormdeel): UL 94 HB
Brandbaarheidsklasse (contacthouder): UL 94 HB
Artikelomschrijving: RSM 3-224/0,9 M
Isolatieweerstand kabel: min 1000 MOhm x km
Isolatieweerstand: ˃ 10^9 Ohm
Geïsoleerde draaddiameter: ø 1.30 ± 0.10 mm
Brandbaarheidsklasse (kabelmantel): DIN EN 50265-2-2, VDE 0482-265-2-2, IEC 60332-2-2, CSA FT2
Contactweerstand: ≤ 10 mOhm
Contactcoating: Cu/Au
Materiaal contacthouder (#1): TPU
Buigcycli: ˃ 5 M
Ontwerpstandaard: IEC 61076-2-104
Torsiecycli: ˃ 5 M @ ± 360 °/1 m
Uniek Nr.: aut106938