M8 Snap-In Sensor/Actuator Enkelzijdige Kabel
€ 53,67
Prijzen excl. BTW en excl. verzendkosten
Verzonden in 1 tot 3 werkdagen
Artikelnummer:
RKMW 5-293/20 M
Fabrikantnummer:
934884011
Merk:
Lumberg Automation
Minimale bestelhoeveelheid:
5
Productinformatie
De M8 Snap-In Sensor/Actuator Enkelzijdige Kabel is ontworpen voor betrouwbaarheid en prestaties in industriële automatisering. Met een 5-pins, B-gecodeerde vrouwelijke connector met een hoekig ontwerp voor efficiënte ruimtebenutting, biedt deze kabel een veilige verbinding met zijn snap-locking mechanisme. De transparante behuizing draagt bij aan gemakkelijk probleemoplossing, terwijl de 5-draads PUR zwarte kabel (0,34 mm²) duurzaamheid garandeert onder verschillende bedrijfsomstandigheden. Geschikt voor 50 V AC / 60 V DC en 4 A, ondersteunt het robuuste werking binnen -40°C tot +90°C. De IP65-classificatie garandeert uitstekende water- en stofbestendigheid, waardoor het geschikt is voor veeleisende omgevingen. De kabel is RoHS-conform en beschikbaar in verschillende lengtes van 2m tot 25m.
Downloads
Specificaties
| Draad kleur 05, zijde 1: | grey |
|---|---|
| Draad kleur 04, zijde 1: | black |
| Draad kleur 03, zijde 1: | blue |
| Draad kleur 02, zijde 1: | white |
| Draad kleur 01, zijde 1: | brown |
| Artikelnummer (#1): | 934884011 |
| Overvoltage Category: | II acc. to DIN EN 60664-1 (VDE 0110-1) |
| Opmerking: | Do not connect or disconnect under load. |
| Vormdeelmateriaal: | TPU |
| Vormdeelkleur: | Translucent |
| Minimale buigradius (flexibele installatie): | ˃ 10 x D |
| Minimale buigradius (vaste installatie): | ˃ 5 x D |
| Koppelcycli: | ≤ 100 |
| Opmerking vermogensreductie: | Notice derating |
| Bedrijfsspanning: | 50 V AC / 60 V DC |
| Bedrijfstemperatuur (UL): | max. + 75 °C |
| Aantal draden: | 5 |
| Aantal pinnen: | 5 |
| UL-keurmerk: | UL 2238; cURus |
| Type contact / Geslacht: | female |
| Afscherming: | Unshielded |
| UL-kabeltype: | AWM: 20549 |
| UL-bestand: | E315587 |
| Draadisolatiemateriaal: | PP |
| RoHS-conform: | yes |
| Productsubfamilie: | M8 Snap-In |
| Productfamillie: | Sensor / Actuator Connectors |
| Vervuilingsgraad: | 3 acc. to DIN EN 60664-1 (VDE 0110-1) |
| Opmerking beschermingsgraad / IP-classificatie: | ** only if mounted and locked in combination with Hirschmann / Lumberg Automation connector. |
| Nominale spanning (UL): | 30 V AC/DC |
| Nominale spanning: | 60 V |
| Nominale impuls-spanning: | 0.8 kV |
| Nominale stroom*: | 4 A |
| Nominale stroom (UL)*: | 3 A |
| Beschermingsgraad / IP-classificatie**: | IP65 |
| Kleur contacthouder: | Orange |
| Kabelnummer: | 293 |
| Kabellengte: | 20 m |
| Codering: | B |
| Contact basismateriaal (#1): | CuZn |
| Connectortype: | Cordset, single ended |
| Connectorontwerp: | angled |
| Geleidermateriaal: | Cu |
| Geleidergrootte: | 0.34 mm² |
| Materiaal kabelmantel: | PUR |
| Kleur kabelmantel: | black matt similarly RAL 9005 |
| Omgevingstemperatuur (flexibele installatie): | - 25 °C - + 90 °C (UL: + 80 °C) |
| Omgevingstemperatuur (vaste installatie): | - 50 °C - + 90 °C (UL: + 80 °C) |
| Omgevingstemperatuur (drag chain installatie): | - 25 °C - + 60 °C |
| Omgevingstemperatuur (bedrijf)*: | - 40 °C - + 90 °C |
| Kabeldiameter D: | ø 5.0 ± 0.20 mm |
| Kabeleigenschappen: | Good microbes and hydrolysis resistance; Mainly plasticizer diffusion free; Exclusion of PVC and silicone; Free of lacquer wetting disturbing substances; Coldness flexibility |
| Bevestigingstype: | Snap-Locking |
| Oppervlaktebehandeling bevestiging: | Nickel-plated |
| Lange omschrijving (#1): | M8 Snap-In Sensor/Actuator Single-Ended Cordset: Female, angled, 5-pin, B-coded, translucent body, 50 V AC / 60 V DC, 4 A; PUR black cable, 5-wires, 0.34 mm² |
| Halogeenvrij: | DIN EN 50267-2-1, IEC 60754-1, VDE 0482-267-2-1 |
| Brandbaarheidsklasse (vormdeel): | UL 94 HB |
| Brandbaarheidsklasse (contacthouder): | UL 94 V-0 |
| Artikelomschrijving: | RKMW 5-293/20 M |
| Isolatieweerstand kabel: | min 1000 MOhm x km |
| Isolatieweerstand: | ˃ 10^9 Ohm |
| Geïsoleerde draaddiameter: | ø 1.30 ± 0.10 mm |
| Brandbaarheidsklasse (kabelmantel): | DIN EN 60332-2-2, VDE 0482-332-2-2, IEC 60332-2-2, CSA FT-2 |
| Contactweerstand: | ≤ 10 mOhm |
| Contactcoating: | Cu/Au |
| Materiaal contacthouder (#1): | PA 66 GF |
| Buigcycli: | ˃ 5 M |
| Ontwerpstandaard: | IEC 61076-2-104 |
| Torsiecycli: | ˃ 5 M @ ± 360 °/1 m |
| Uniek Nr.: | aut934884011 |