M8 Snap-In Sensor-/Actuator Enkelzijdige Cordset
€ 10,17
Prijzen excl. BTW en excl. verzendkosten
Verzonden in 1 tot 3 werkdagen
Artikelnummer:
RKM 4-225/0,68 M
Fabrikantnummer:
20311
EAN:
04001088104822
Merk:
Lumberg Automation
Minimale bestelhoeveelheid:
10
Productinformatie
De M8 Snap-In Sensor/Actuator Enkelzijdige Cordset is ontworpen voor betrouwbare connectiviteit in industriële omgevingen. Deze cordset heeft een vrouwelijke, rechte, 4-pins, A-gecodeerde ontwerp met een doorschijnende behuizing. Het werkt met 30 V AC/DC en ondersteunt tot 4 A stroom. De kabel is gemaakt van duurzaam PUR zwart materiaal met vier 0.34 mm² draden, wat zorgt voor robuuste prestaties in veeleisende toepassingen. De geïsoleerde draden zijn beschermd met een zwarte matte kabelmantel, die uitstekende weerstand biedt tegen microben, hydrolyse en koude temperaturen, waardoor het ideaal is voor uiteenlopende bedrijfsomstandigheden. De IP65-classificatie zorgt ervoor dat het product goed beschermd is tegen stof en water. Daarnaast voldoet de cordset aan strikte milieunormen, doordat het halogeenvrij en UL-gecertificeerd is.
Downloads
Specificaties
| Draad kleur 04, zijde 1: | black |
|---|---|
| Draad kleur 03, zijde 1: | blue |
| Draad kleur 02, zijde 1: | white |
| Draad kleur 01, zijde 1: | brown |
| Artikelnummer (#1): | 20311 |
| Overvoltage Category: | III acc. to DIN EN 60664-1 (VDE 0110-1) |
| Opmerking: | Do not connect or disconnect under load. |
| Vormdeelmateriaal: | TPU |
| Vormdeelkleur: | Translucent |
| Minimale buigradius (flexibele installatie): | ˃ 10 x D |
| Minimale buigradius (vaste installatie): | ˃ 5 x D |
| Koppelcycli: | ≤ 100 |
| Opmerking vermogensreductie: | Notice derating |
| Bedrijfsspanning: | 30 V AC/DC |
| Bedrijfstemperatuur (UL): | max. + 70 °C |
| Aantal draden: | 4 |
| Aantal pinnen: | 4 |
| UL-keurmerk: | UL 2238; cURus |
| Type contact / Geslacht: | female |
| Afscherming: | Unshielded |
| UL-kabeltype: | AWM: 20549 |
| UL-bestand: | E315587 |
| Draadisolatiemateriaal: | PP |
| RoHS-conform: | yes |
| Productsubfamilie: | M8 Snap-In |
| Productfamillie: | Sensor / Actuator Connectors |
| Vervuilingsgraad: | 3 acc. to DIN EN 60664-1 (VDE 0110-1) |
| Opmerking beschermingsgraad / IP-classificatie: | ** only if mounted and locked in combination with Hirschmann / Lumberg Automation connector. |
| Nominale spanning (UL): | 30 V AC/DC |
| Nominale spanning: | 30 V |
| Nominale impuls-spanning: | 0.8 kV |
| Nominale stroom*: | 4 A |
| Nominale stroom (UL)*: | 4 A |
| Beschermingsgraad / IP-classificatie**: | IP65 |
| Kleur contacthouder: | Orange |
| Kabelnummer: | 225 |
| Kabellengte: | 0.68 m |
| Codering: | A |
| Contact basismateriaal (#1): | CuSn |
| Connectortype: | Cordset, single ended |
| Connectorontwerp: | straight |
| Geleidermateriaal: | Cu |
| Geleidergrootte: | 0.34 mm² |
| Materiaal kabelmantel: | PUR |
| Kleur kabelmantel: | black matt similarly RAL 9005 |
| Omgevingstemperatuur (flexibele installatie): | - 25 °C - + 90 °C (UL: + 80 °C) |
| Omgevingstemperatuur (vaste installatie): | - 50 °C - + 90 °C (UL: + 80 °C) |
| Omgevingstemperatuur (drag chain installatie): | - 25 °C - + 60 °C |
| Omgevingstemperatuur (bedrijf)*: | - 40 °C - + 90 °C |
| Kabeldiameter D: | ø 4.70 ± 0.15 mm |
| Kabeleigenschappen: | Good microbes and hydrolysis resistance; Mainly plasticizer diffusion free; Exclusion of PVC and silicone; Coldness flexibility; Free of lacquer wetting disturbing substances |
| Bevestigingstype: | Snap-Locking |
| Lange omschrijving (#1): | M8 Snap-In Sensor/Actuator Single-Ended Cordset: Female, straight, 4-pin, A-coded, translucent body, 30 V AC/DC, 4 A; PUR black cable, 4-wires, 0.34 mm² |
| Halogeenvrij: | DIN EN 50267-2-1, IEC 60754-1, VDE 0482-267-2-1 |
| Brandbaarheidsklasse (vormdeel): | UL 94 HB |
| Brandbaarheidsklasse (contacthouder): | UL 94 HB |
| Artikelomschrijving: | RKM 4-225/0,68 M |
| Isolatieweerstand kabel: | min 1000 MOhm x km |
| Isolatieweerstand: | ˃ 10^9 Ohm |
| Geïsoleerde draaddiameter: | ø 1.30 ± 0.10 mm |
| Brandbaarheidsklasse (kabelmantel): | DIN EN 60332-2-2, VDE 0482-332-2-2, IEC 60332-2-2, CSA FT-2 |
| Contactweerstand: | ≤ 10 mOhm |
| Contactcoating: | Cu/Au |
| Materiaal contacthouder (#1): | TPU |
| Buigcycli: | ˃ 5 M |
| Ontwerpstandaard: | IEC 61076-2-104 |
| Torsiecycli: | ˃ 5 M @ ± 360 °/1 m |
| Uniek Nr.: | aut20311 |