M8 Snap-In Sensor/Actuator Enkelzijdig Cordset
€ 14,82
Prijzen excl. BTW en excl. verzendkosten
Verzonden in 1 tot 3 werkdagen
Artikelnummer:
RSM 3-06/2 M
Fabrikantnummer:
11646
EAN:
04020841033797
Merk:
Lumberg Automation
Minimale bestelhoeveelheid:
10
Productinformatie
Het M8 Snap-In Sensor/Actuator Enkelzijdig Cordset is ontworpen als een veelzijdige verbindingsoplossing voor sensoren en actuatoren in industriële automatisering. Het beschikt over een mannelijke, rechte, 3-pin, A-gecodeerde connector met een doorschijnend lichaam. Dit cordset ondersteunt werkspanningen tot 50 V AC of 60 V DC met een nominale stroom van 4 A. De kabel is gemaakt van robuust PVC in een fel oranje kleur, bestaande uit drie 0,34 mm² geleiders. Het biedt betrouwbare prestaties met een beschermingsgraad van IP65 en IP67, wat zorgt voor betrouwbare inzet in veeleisende omgevingen. Het cordset behoudt een goede chemische en oliebestendigheid, wat het geschikt maakt voor verschillende industriële toepassingen.
Downloads
Specificaties
| Draad kleur 04, zijde 1: | black |
|---|---|
| Draad kleur 03, zijde 1: | blue |
| Draad kleur 01, zijde 1: | brown |
| Artikelnummer (#1): | 11646 |
| Overvoltage Category: | III acc. to DIN EN 60664-1 (VDE 0110-1) |
| Opmerking: | Do not connect or disconnect under load. |
| Vormdeelmateriaal: | TPU |
| Vormdeelkleur: | Translucent |
| Minimale buigradius (flexibele installatie): | ˃ 10 x D |
| Minimale buigradius (vaste installatie): | ˃ 5 x D |
| Koppelcycli: | ≤ 100 |
| Opmerking vermogensreductie: | Notice derating |
| Bedrijfsspanning: | 50 V AC / 60 V DC |
| Bedrijfstemperatuur (UL): | max. + 70 °C |
| Oliebestendigheid: | Good chemical and oil resistance |
| Aantal draden: | 3 |
| Aantal pinnen: | 3 |
| UL-keurmerk: | UL 2238; cURus |
| Type contact / Geslacht: | Male |
| Afscherming: | Unshielded |
| UL-kabeltype: | AWM: 2464 |
| UL-bestand: | E315587 |
| Draadisolatiemateriaal: | PVC |
| RoHS-conform: | yes |
| Productsubfamilie: | M8 Snap-In |
| Productfamillie: | Sensor / Actuator Connectors |
| Vervuilingsgraad: | 3 acc. to DIN EN 60664-1 (VDE 0110-1) |
| Opmerking beschermingsgraad / IP-classificatie: | ** only if mounted and locked in combination with Hirschmann / Lumberg Automation connector. |
| Nominale spanning (UL): | 30 V AC/DC |
| Nominale spanning: | 60 V |
| Nominale impuls-spanning: | 1.5 kV |
| Nominale stroom*: | 4 A |
| Nominale stroom (UL)*: | 4 A |
| Beschermingsgraad / IP-classificatie**: | IP65 (in combination with female M8 Snap-In connector); IP65, IP67 (in combination with female M8 Standard connector) |
| Kleur contacthouder: | Orange |
| Kabelnummer: | 006 |
| Kabellengte: | 2 m |
| Codering: | A |
| Contact basismateriaal (#1): | CuSn |
| Connectortype: | Cordset, single ended |
| Connectorontwerp: | straight |
| Geleidermateriaal: | Cu |
| Geleidergrootte: | 0.34 mm² |
| Materiaal kabelmantel: | PVC |
| Kleur kabelmantel: | orange |
| Omgevingstemperatuur (flexibele installatie): | + 5 °C - + 90 °C (UL: + 80 °C) |
| Omgevingstemperatuur (vaste installatie): | - 40 °C - + 90 °C (UL: + 80 °C) |
| Omgevingstemperatuur (drag chain installatie): | + 5 °C - + 60 °C |
| Omgevingstemperatuur (bedrijf)*: | - 40 °C - + 90 °C |
| Kabeldiameter D: | ø 5.0 ± 0.2 mm |
| Kabeleigenschappen: | Free of lacquer wetting disturbing substances; Exclusion of silicone |
| Bevestigingstype: | Snap- and Screw-Locking |
| Oppervlaktebehandeling bevestiging: | Nickel-plated |
| Bevestigingsmateriaal: | CuZn |
| Lange omschrijving (#1): | M8 Snap-In Sensor/Actuator Single-Ended Cordset: Male, straight, 3-pin, A-coded, translucent body, 50 V AC / 60 V DC, 4 A; PVC orange cable, 3-wires, 0.34 mm² |
| Brandbaarheidsklasse (vormdeel): | UL 94 HB |
| Brandbaarheidsklasse (contacthouder): | UL 94 HB |
| Artikelomschrijving: | RSM 3-06/2 M |
| Isolatieweerstand kabel: | min 10 MOhm x km |
| Isolatieweerstand: | ˃ 10^9 Ohm |
| Geïsoleerde draaddiameter: | ø 1.50 mm |
| Brandbaarheidsklasse (kabelmantel): | DIN EN 60332-1-2, VDE 0482-332-1-2, IEC 60332-1-2, UL VW-1 |
| Contactweerstand: | ≤ 10 mOhm |
| Contactcoating: | Cu/Au |
| Materiaal contacthouder (#1): | TPU |
| Buigcycli: | ˃ 1 M |
| Ontwerpstandaard: | IEC 61076-2-104 |
| Uniek Nr.: | aut11646 |