M8 Snap-In Sensor/Aanrijdingskabel Enkelzijdig
€ 10,05
Prijzen excl. BTW en excl. verzendkosten
Verzonden in 1 tot 3 werkdagen
Artikelnummer:
RKM 3-06/2 M
Fabrikantnummer:
11278
EAN:
04020841152016
Merk:
Lumberg Automation
Minimale bestelhoeveelheid:
10
Productinformatie
De M8 Snap-In Sensor/Aanrijdingskabel Enkelzijdig is ontworpen voor betrouwbare en efficiënte verbindingen in industriële automatiseringssystemen. Deze kabel heeft een vrouwelijke, rechte 3-pins connector met A-codering en een doorschijnende behuizing, wat zorgt voor duidelijke zichtbaarheid en gebruiksgemak. Hij is geschikt voor maximaal 50 V AC / 60 V DC met een stroomcapaciteit van 4 A, en daarmee geschikt voor diverse sensor- en actuatorapplicaties. De kabel bestaat uit een duurzame PVC oranje kabel met 3 draden en een geleidergrootte van 0,34 mm², wat flexibiliteit en robuustheid biedt in zware omgevingen. De kabel biedt uitstekende contactweerstand (≤ 10 mOhm) en isolatieweerstand (˃ 10^9 Ohm), wat zorgt voor betrouwbare prestaties. De TPU-gegoten behuizing verhoogt de duurzaamheid, terwijl de IP65-beschermingsgraad zorgt voor weerstand tegen stof en water. De minuscule buigradius en blijvende flexibiliteit maken het ideaal voor zowel vaste als flexibele installaties in automatiseringssystemen.
Downloads
Specificaties
| Draad kleur 04, zijde 1: | black |
|---|---|
| Draad kleur 03, zijde 1: | blue |
| Draad kleur 01, zijde 1: | brown |
| Artikelnummer (#1): | 11278 |
| Overvoltage Category: | III acc. to DIN EN 60664-1 (VDE 0110-1) |
| Opmerking: | Do not connect or disconnect under load. |
| Vormdeelmateriaal: | TPU |
| Vormdeelkleur: | Translucent |
| Minimale buigradius (flexibele installatie): | ˃ 10 x D |
| Minimale buigradius (vaste installatie): | ˃ 5 x D |
| Koppelcycli: | ≤ 100 |
| Opmerking vermogensreductie: | Notice derating |
| Bedrijfsspanning: | 50 V AC / 60 V DC |
| Bedrijfstemperatuur (UL): | max. + 70 °C |
| Oliebestendigheid: | Good chemical and oil resistance |
| Aantal draden: | 3 |
| Aantal pinnen: | 3 |
| UL-keurmerk: | UL 2238; cURus |
| Type contact / Geslacht: | female |
| Afscherming: | Unshielded |
| UL-kabeltype: | AWM: 2464 |
| UL-bestand: | E315587 |
| Draadisolatiemateriaal: | PVC |
| RoHS-conform: | yes |
| Productsubfamilie: | M8 Snap-In |
| Productfamillie: | Sensor / Actuator Connectors |
| Vervuilingsgraad: | 3 acc. to DIN EN 60664-1 (VDE 0110-1) |
| Opmerking beschermingsgraad / IP-classificatie: | ** only if mounted and locked in combination with Hirschmann / Lumberg Automation connector. |
| Nominale spanning (UL): | 30 V AC/DC |
| Nominale spanning: | 60 V |
| Nominale impuls-spanning: | 1.5 kV |
| Nominale stroom*: | 4 A |
| Nominale stroom (UL)*: | 4 A |
| Beschermingsgraad / IP-classificatie**: | IP65 |
| Kleur contacthouder: | Orange |
| Kabelnummer: | 006 |
| Kabellengte: | 2 m |
| Codering: | A |
| Contact basismateriaal (#1): | CuSn |
| Connectortype: | Cordset, single ended |
| Connectorontwerp: | straight |
| Geleidermateriaal: | Cu |
| Geleidergrootte: | 0.34 mm² |
| Materiaal kabelmantel: | PVC |
| Kleur kabelmantel: | orange |
| Omgevingstemperatuur (flexibele installatie): | + 5 °C - + 90 °C (UL: + 80 °C) |
| Omgevingstemperatuur (vaste installatie): | - 40 °C - + 90 °C (UL: + 80 °C) |
| Omgevingstemperatuur (drag chain installatie): | + 5 °C - + 60 °C |
| Omgevingstemperatuur (bedrijf)*: | - 40 °C - + 90 °C |
| Kabeldiameter D: | ø 5.0 ± 0.2 mm |
| Kabeleigenschappen: | Free of lacquer wetting disturbing substances; Exclusion of silicone |
| Bevestigingstype: | Snap-Locking |
| Lange omschrijving (#1): | M8 Snap-In Sensor/Actuator Single-Ended Cordset: Female, straight, 3-pin, A-coded, translucent body, 50 V AC / 60 V DC, 4 A; PVC orange cable, 3-wires, 0.34 mm² |
| Brandbaarheidsklasse (vormdeel): | UL 94 HB |
| Brandbaarheidsklasse (contacthouder): | UL 94 HB |
| Artikelomschrijving: | RKM 3-06/2 M |
| Isolatieweerstand kabel: | min 10 MOhm x km |
| Isolatieweerstand: | ˃ 10^9 Ohm |
| Geïsoleerde draaddiameter: | ø 1.50 mm |
| Brandbaarheidsklasse (kabelmantel): | DIN EN 60332-1-2, VDE 0482-332-1-2, IEC 60332-1-2, UL VW-1 |
| Contactweerstand: | ≤ 10 mOhm |
| Contactcoating: | Cu/Au |
| Materiaal contacthouder (#1): | TPU |
| Buigcycli: | ˃ 1 M |
| Ontwerpstandaard: | IEC 61076-2-104 |
| Uniek Nr.: | aut11278 |