M12 Standard Sensor/Actuator Single-Ended Cordset
€ 22,06
Prijzen excl. BTW en excl. verzendkosten
Verzonden in 1 tot 3 werkdagen
Artikelnummer:
RST 5-87/1 M
Fabrikantnummer:
15793
EAN:
04020841032608
Merk:
Lumberg Automation
Minimale bestelhoeveelheid:
10
Productinformatie
De M12 Standard Sensor/Actuator Single-Ended Cordset beschikt over een mannelijke, rechte, 5-pins, A-gecodeerde connector met een transparant lichaam. Het is geschikt voor 50 V AC / 60 V DC en 4 A. Deze cordset is voorzien van een zwarte, PUR kabel met 5 draden van elk 0,34 mm². De cordset biedt een hoge duurzaamheid met een beschermingsgraad van IP65, IP67, IP68 en IP69K, waardoor deze geschikt is voor zware omgevingen. Het ondersteunt tot 100 koppelingscycli en werkt effectief binnen temperatuurbereiken van -40 °C tot +90 °C. Gebruikte materialen omvatten CuSn voor de contactbasis, Cu/Au voor contactbekleding en TPU-GF voor de contacthouder, wat zorgt voor betrouwbare connectiviteit en prestaties. Toepassingen omvatten industriële automatisering en machines, waar precieze en betrouwbare sensor- en actuatoraansluitingen essentieel zijn.
Downloads
Specificaties
| Draad kleur 05, zijde 1: | green-yellow |
|---|---|
| Draad kleur 04, zijde 1: | black |
| Draad kleur 03, zijde 1: | blue |
| Draad kleur 02, zijde 1: | white |
| Draad kleur 01, zijde 1: | brown |
| Artikelnummer (#1): | 15793 |
| Overvoltage Category: | III acc. to DIN EN 60664-1 (VDE 0110-1) |
| Opmerking: | Do not connect or disconnect under load. |
| Vormdeelmateriaal: | TPU |
| Vormdeelkleur: | Translucent |
| Minimale buigradius (flexibele installatie): | ˃ 10 x D |
| Minimale buigradius (vaste installatie): | ˃ 5 x D |
| Koppelcycli: | ≤ 100 |
| Opmerking vermogensreductie: | Notice derating |
| Bedrijfsspanning: | 50 V AC / 60 V DC |
| Oliebestendigheid: | TM5 HD21.1 S4 |
| Aantal draden: | 5 |
| Aantal pinnen: | 5 |
| Type contact / Geslacht: | Male |
| Afscherming: | Unshielded |
| Draadisolatiemateriaal: | PVC TI2 |
| RoHS-conform: | yes |
| Producttype: | Assemblies & Patch cords |
| Productsubfamilie: | M12 Standard |
| Productfamillie: | Sensor / Actuator Connectors |
| Vervuilingsgraad: | 3 acc. to DIN EN 60664-1 (VDE 0110-1) |
| Opmerking beschermingsgraad / IP-classificatie: | ** only if mounted and locked in combination with Hirschmann / Lumberg Automation connector. |
| Nominale spanning: | 60 V |
| Nominale impuls-spanning: | 1.5 kV |
| Nominale stroom*: | 4 A |
| Beschermingsgraad / IP-classificatie**: | IP65, IP67, IP68 (1 m / 24 h), IP69K |
| Kleur contacthouder: | Orange |
| Kabelnummer: | 087 |
| Kabellengte: | 1 m |
| Codering: | A |
| Contact basismateriaal (#1): | CuSn |
| Connectortype: | Cordset, single ended |
| Connectorontwerp: | straight |
| Geleidermateriaal: | Cu |
| Geleidergrootte: | 0.34 mm² |
| Materiaal kabelmantel: | PUR |
| Kleur kabelmantel: | black matt similarly RAL 9005 |
| Omgevingstemperatuur (flexibele installatie): | - 20 °C - + 80 °C |
| Omgevingstemperatuur (vaste installatie): | - 40 °C - + 80 °C |
| Omgevingstemperatuur (bedrijf)*: | - 40 °C - + 90 °C |
| Kabeldiameter D: | ø 5.50 ± 0.20 mm |
| Kabeleigenschappen: | Good microbes and hydrolysis resistance; Mainly plasticizer diffusion free; LABS-free of lacquer wetting disturbing substances; Exclusion of silicone |
| Bevestigingstype: | Coupling Screw |
| Oppervlaktebehandeling bevestiging: | Nickel-plated |
| Bevestigingsmateriaal: | CuZn |
| Lange omschrijving (#1): | M12 Standard Sensor/Actuator Single-Ended Cordset: Male, straight, 5-pin, A-coded, translucent body, 50 V AC / 60 V DC, 4 A; PUR black cable, 5-wires, 0.34 mm² |
| Brandbaarheidsklasse (vormdeel): | UL 94 HB |
| Brandbaarheidsklasse (contacthouder): | UL 94 HB |
| Artikelomschrijving: | RST 5-87/1 M |
| Isolatieweerstand kabel: | min 100 MOhm x km |
| Isolatieweerstand: | ˃ 10^9 Ohm |
| Geïsoleerde draaddiameter: | ø 1.40 ± 0.05 mm |
| Brandbaarheidsklasse (kabelmantel): | DIN EN 60332-1-2, VDE 0482-332-1-2, IEC 60332-1-2 |
| Contactweerstand: | ≤ 10 mOhm |
| Contactcoating: | Cu/Au |
| Materiaal contacthouder (#1): | TPU-GF |
| Aandraaimoment (bevestiging): | M 12x1: (50-60) Ncm, hand-tight |
| Ontwerpstandaard: | Pin assignment deviating from IEC 61076-2-101 and IEC 61140 |
| Uniek Nr.: | aut15793 |