M12 Standard Sensor/Actuator Single-Ended Cordset
€ 46,79
Prijzen excl. BTW en excl. verzendkosten
Verzonden in 1 tot 3 werkdagen
Artikelnummer:
RKT 8-6-337/10 M
Fabrikantnummer:
62978
EAN:
04020841553547
Merk:
Lumberg Automation
Minimale bestelhoeveelheid:
10
Productinformatie
De M12 Standard Sensor/Actuator Single-Ended Cordset beschikt over een 8-pins, vrouwelijke, rechte connector met een A-gecodeerde, transparante behuizing. Het werkt op 30 V AC/DC en ondersteunt een stroomcapaciteit van 2 A. De cordset is voorzien van een zwarte PUR-kabel met 6 draden en een geleidergrootte van 0,34 mm². Het is ontworpen voor betrouwbare toepassingen in industriële omgevingen en biedt meerdere beschermingsgraden, waaronder IP65, IP67, IP68 en IP69K. De materialen die gebruikt worden in de constructie, zoals CuZn voor contacten en TPU voor het gegoten lichaam, zorgen voor duurzaamheid. Dit cordset is bijzonder geschikt voor sensor- en actuatorverbindingen in automatiseringssystemen.
Downloads
Specificaties
| Draad kleur 07, zijde 1: | blue |
|---|---|
| Draad kleur 06, zijde 1: | n.c. |
| Draad kleur 05, zijde 1: | brown |
| Draad kleur 04, zijde 1: | grey |
| Draad kleur 03, zijde 1: | yellow |
| Draad kleur 02, zijde 1: | green |
| Draad kleur 01, zijde 1: | white |
| Draad kleur 08, zijde 1: | n.c. |
| Artikelnummer (#1): | 62978 |
| Overvoltage Category: | III acc. to DIN EN 60664-1 (VDE 0110-1) |
| Opmerking: | Do not connect or disconnect under load. |
| Vormdeelmateriaal: | TPU |
| Vormdeelkleur: | Translucent |
| Minimale buigradius (flexibele installatie): | ˃ 10 x D |
| Minimale buigradius (vaste installatie): | ˃ 5 x D |
| Koppelcycli: | ≤ 100 |
| Opmerking vermogensreductie: | Notice derating |
| Bedrijfsspanning: | 30 V AC/DC |
| Oliebestendigheid: | Good chemical and oil resistance |
| O-ringmateriaal: | FKM, green |
| Aantal draden: | 6 |
| Aantal pinnen: | 8 |
| Type contact / Geslacht: | female |
| Afscherming: | Unshielded |
| UL-kabeltype: | AWM: 20549 |
| Draadisolatiemateriaal: | PP |
| RoHS-conform: | yes |
| Producttype: | Assemblies & Patch cords |
| Productsubfamilie: | M12 Standard |
| Productfamillie: | Sensor / Actuator Connectors |
| Vervuilingsgraad: | 3 acc. to DIN EN 60664-1 (VDE 0110-1) |
| Opmerking beschermingsgraad / IP-classificatie: | ** only if mounted and locked in combination with Hirschmann / Lumberg Automation connector. |
| Nominale spanning: | 30 V |
| Nominale impuls-spanning: | 0.8 kV |
| Nominale stroom*: | 2 A |
| Beschermingsgraad / IP-classificatie**: | IP65, IP67, IP68 (1 m / 24 h), IP69K |
| Kleur contacthouder: | Orange |
| Kabelnummer: | 337 |
| Kabellengte: | 10 m |
| Codering: | A |
| Contact basismateriaal (#1): | CuZn |
| Connectortype: | Cordset, single ended |
| Connectorontwerp: | straight |
| Geleidermateriaal: | Cu |
| Geleidergrootte: | 0.34 mm² |
| Materiaal kabelmantel: | PUR |
| Kleur kabelmantel: | black |
| Omgevingstemperatuur (flexibele installatie): | - 25 °C - + 80 °C |
| Omgevingstemperatuur (vaste installatie): | - 50 °C - + 80 °C |
| Omgevingstemperatuur (drag chain installatie): | - 25 °C - + 60 °C |
| Omgevingstemperatuur (bedrijf)*: | - 40 °C - + 90 °C |
| Kabeldiameter D: | ø 6.0 ± 0.20 mm |
| Kabeleigenschappen: | Good microbes and hydrolysis resistance; Mainly plasticizer diffusion free; Exclusion of PVC and silicone; LABS-free of lacquer wetting disturbing substances; Coldness flexibility |
| Bevestigingstype: | Coupling Nut |
| Oppervlaktebehandeling bevestiging: | Nickel-plated |
| Bevestigingsmateriaal: | CuZn |
| Lange omschrijving (#1): | M12 Standard Sensor/Actuator Single-Ended Cordset: Female, straight, 8-pin, A-coded, translucent body, 30 V AC/DC, 2 A; PUR black cable, 6-wires, 0.34 mm² |
| Halogeenvrij: | DIN EN 50267-2-1, IEC 60754-1, VDE 0482-267-2-1 |
| Brandbaarheidsklasse (vormdeel): | UL 94 HB |
| Brandbaarheidsklasse (contacthouder): | UL 94 HB |
| Artikelomschrijving: | RKT 8-6-337/10 M |
| Isolatieweerstand kabel: | min 1000 MOhm x km |
| Isolatieweerstand: | ˃ 10^9 Ohm |
| Geïsoleerde draaddiameter: | ø 1.50 mm |
| Brandbaarheidsklasse (kabelmantel): | DIN EN 60332-2-2, VDE 0482-332-2-2, IEC 60332-2-2, CSA FT-2 |
| Contactweerstand: | ≤ 10 mOhm |
| Contactcoating: | Cu/Au |
| Materiaal contacthouder (#1): | TPU |
| Buigcycli: | ˃ 5 M |
| Aandraaimoment (bevestiging): | M 12x1: (50-60) Ncm, hand-tight |
| Ontwerpstandaard: | IEC 61076-2-101 |
| Torsiecycli: | ˃ 5 M @ ± 360 °/1 m |
| Uniek Nr.: | aut62978 |