M12 Standard Sensor/Actuator Single-Ended Cordset
€ 15,55
Prijzen excl. BTW en excl. verzendkosten
Verzonden in 1 tot 3 werkdagen
Artikelnummer:
RKT 4-3-06/5 M
Fabrikantnummer:
11364
EAN:
04020841001482
Merk:
Lumberg Automation
Minimale bestelhoeveelheid:
10
Productinformatie
De M12 Standard Sensor/Actuator Single-Ended Cordset is ontworpen voor betrouwbare en veilige verbindingen. Het beschikt over een vrouwelijk, recht, 4-pins, A-gecodeerd transparant lichaam geschikt voor 230 V AC/DC en kan tot 4 A verwerken. De constructie bestaat uit een robuuste PVC oranje kabel met 3 draden en een doorsnede van 0,34 mm², wat duurzaamheid en flexibiliteit in verschillende omgevingen garandeert. Het voldoet aan de IEC 61076-2-101 normen en de IP65/IP67 classificatie garandeert weerstand tegen stof en water, waardoor het ideaal is voor industriële toepassingen. De cordset is bijzonder nuttig bij het aansluiten van sensoren en actuatoren binnen geautomatiseerde systemen, wat zorgt voor betrouwbare signaal- en stroomoverdracht en voldoet aan hoge veiligheids- en prestatie-eisen.
Downloads
Specificaties
| Draad kleur 04, zijde 1: | black |
|---|---|
| Draad kleur 03, zijde 1: | blue |
| Draad kleur 02, zijde 1: | n.c. |
| Draad kleur 01, zijde 1: | brown |
| Artikelnummer (#1): | 11364 |
| Overvoltage Category: | II acc. to DIN EN 60664-1 (VDE 0110-1) |
| Opmerking: | Do not connect or disconnect under load. |
| Vormdeelmateriaal: | TPU |
| Vormdeelkleur: | Translucent |
| Minimale buigradius (flexibele installatie): | ˃ 10 x D |
| Minimale buigradius (vaste installatie): | ˃ 5 x D |
| Koppelcycli: | ≤ 100 |
| Opmerking vermogensreductie: | Notice derating |
| Bedrijfsspanning: | 230 V AC/DC |
| Bedrijfstemperatuur (UL): | max. + 50 °C |
| Oliebestendigheid: | Good chemical and oil resistance |
| O-ringmateriaal: | FKM, green |
| Aantal draden: | 3 |
| Aantal pinnen: | 4 |
| UL-keurmerk: | UL 2238; cURus |
| Type contact / Geslacht: | female |
| Afscherming: | Unshielded |
| UL-kabeltype: | AWM: 2464 |
| UL-bestand: | E315587 |
| Draadisolatiemateriaal: | PVC |
| RoHS-conform: | yes |
| Producttype: | Assemblies & Patch cords |
| Productsubfamilie: | M12 Standard |
| Productfamillie: | Sensor / Actuator Connectors |
| Vervuilingsgraad: | 3 acc. to DIN EN 60664-1 (VDE 0110-1) |
| Opmerking beschermingsgraad / IP-classificatie: | ** only if mounted and locked in combination with Hirschmann / Lumberg Automation connector. |
| Nominale spanning (UL): | 250 V AC |
| Nominale spanning: | 250 V |
| Nominale impuls-spanning: | 2.5 kV |
| Nominale stroom*: | 4 A |
| Nominale stroom (UL)*: | 4 A |
| Beschermingsgraad / IP-classificatie**: | IP65, IP67 |
| Kleur contacthouder: | Orange |
| Kabelnummer: | 006 |
| Kabellengte: | 5 m |
| Codering: | A |
| Contact basismateriaal (#1): | CuSn |
| Connectortype: | Cordset, single ended |
| Connectorontwerp: | straight |
| Geleidermateriaal: | Cu |
| Geleidergrootte: | 0.34 mm² |
| Materiaal kabelmantel: | PVC |
| Kleur kabelmantel: | orange |
| Omgevingstemperatuur (flexibele installatie): | + 5 °C - + 90 °C (UL: + 80 °C) |
| Omgevingstemperatuur (vaste installatie): | - 40 °C - + 90 °C (UL: + 80 °C) |
| Omgevingstemperatuur (drag chain installatie): | + 5 °C - + 60 °C |
| Omgevingstemperatuur (bedrijf)*: | - 40 °C - + 90 °C |
| Kabeldiameter D: | ø 5.0 ± 0.2 mm |
| Kabeleigenschappen: | Free of lacquer wetting disturbing substances; Exclusion of silicone |
| Bevestigingstype: | Coupling Nut |
| Oppervlaktebehandeling bevestiging: | Nickel-plated |
| Bevestigingsmateriaal: | CuZn |
| Lange omschrijving (#1): | M12 Standard Sensor/Actuator Single-Ended Cordset: Female, straight, 4-pin, A-coded, translucent body, 230 V AC/DC, 4 A; PVC orange cable, 3-wires, 0.34 mm² |
| Brandbaarheidsklasse (vormdeel): | UL 94 HB |
| Brandbaarheidsklasse (contacthouder): | UL 94 HB |
| Artikelomschrijving: | RKT 4-3-06/5 M |
| Isolatieweerstand kabel: | min 10 MOhm x km |
| Isolatieweerstand: | ˃ 10^9 Ohm |
| Geïsoleerde draaddiameter: | ø 1.50 mm |
| Brandbaarheidsklasse (kabelmantel): | DIN EN 60332-1-2, VDE 0482-332-1-2, IEC 60332-1-2, UL VW-1 |
| Contactweerstand: | ≤ 10 mOhm |
| Contactcoating: | Cu/Au |
| Materiaal contacthouder (#1): | TPU |
| Buigcycli: | ˃ 1 M |
| Aandraaimoment (bevestiging): | M 12x1: (50-60) Ncm, hand-tight |
| Ontwerpstandaard: | IEC 61076-2-101 |
| Uniek Nr.: | aut11364 |