Ga naar de hoofdinhoud Ga naar de zoekopdracht Ga naar de hoofdnavigatie
usp icon Meer dan 50 jaar kennis en ervaring
usp icon Ruim 10.000 producten op voorraad
usp icon Snelle levering

Productinformatie

De M12 Standard Sensor/Actuator Enkelzijdige Aansluitkabel is ontworpen voor betrouwbaarheid en prestaties in veeleisende industriële omgevingen. De kabel beschikt over een vrouwelijke rechte 4-pins A-gecodeerde connector die werkt op 230 V AC/DC en ondersteuning biedt tot 4 A. De aansluitkabel is uitgerust met een duurzame gele PUR-kabel met vier 0,824 mm² draden, die uitstekende flexibiliteit en weerstand biedt tegen chemicaliën en olie. Deze zeer betrouwbare connector heeft beschermingsniveaus van IP65, IP67, IP68 en IP69K. Met een robuuste TPU-behuizing en nikkel-gelaten CuZn bevestigingsmaterialen garandeert de kabel duurzaamheid en consistente prestaties. Ideaal voor het maken van veilige verbindingen tussen sensoren en actuators in geautomatiseerde systemen, kan dit product temperaturen weerstaan van -40 °C tot +90 °C in bedrijf.

Downloads

Specificaties

Draad kleur 04, zijde 1: black
Draad kleur 03, zijde 1: blue
Draad kleur 02, zijde 1: white
Draad kleur 01, zijde 1: brown
Artikelnummer (#1): 39500
Overvoltage Category: II acc. to DIN EN 60664-1 (VDE 0110-1)
Opmerking: Do not connect or disconnect under load.
Vormdeelmateriaal: TPU
Vormdeelkleur: yellow
Minimale buigradius (flexibele installatie): ˃ 10 x D
Minimale buigradius (vaste installatie): ˃ 5 x D
Koppelcycli: ≤ 100
Opmerking vermogensreductie: Notice derating
Bedrijfsspanning: 230 V AC/DC
Oliebestendigheid: Good chemical and oil resistance
O-ringmateriaal: FKM, green
Aantal draden: 4
Aantal pinnen: 4
Type contact / Geslacht: female
Afscherming: Unshielded
Draadisolatiemateriaal: PVC class 43
RoHS-conform: yes
Producttype: Assemblies & Patch cords
Productsubfamilie: M12 Standard
Productfamillie: Sensor / Actuator Connectors
Vervuilingsgraad: 3 acc. to DIN EN 60664-1 (VDE 0110-1)
Opmerking beschermingsgraad / IP-classificatie: ** only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.
Nominale spanning: 250 V
Nominale impuls-spanning: 2.5 kV
Nominale stroom*: 4 A
Beschermingsgraad / IP-classificatie**: IP65, IP67, IP68 (1 m / 24 h), IP69K
Kleur contacthouder: black
Kabelnummer: 798
Kabellengte: 10 m
Codering: A
Contact basismateriaal (#1): CuZn
Connectortype: Cordset, single ended
Connectorontwerp: straight
Geleidermateriaal: Cu
Geleidergrootte: 0.824 mm²
Materiaal kabelmantel: PUR
Kleur kabelmantel: yellow matt similarly RAL 1021
Omgevingstemperatuur (flexibele installatie): - 20 °C - + 80 °C
Omgevingstemperatuur (vaste installatie): - 45 °C - + 80 °C
Omgevingstemperatuur (bedrijf)*: - 40 °C - + 90 °C
Kabeldiameter D: ø 5.85 ± 0.20 mm
Kabeleigenschappen: Free of lacquer wetting disturbing substances; Good microbes and hydrolysis resistance; Good chemical and oil resistance; Exclusion of silicone; Coldness flexibility
Bevestigingstype: Coupling Nut
Oppervlaktebehandeling bevestiging: Nickel-plated
Bevestigingsmateriaal: CuZn
Lange omschrijving (#1): M12 Standard Sensor/Actuator Single-Ended Cordset: Female, straight, 4-pin, A-coded, yellow body, 230 V AC/DC, 4 A; PUR yellow cable, 4-wires, 0.824 mm²
Brandbaarheidsklasse (vormdeel): UL 94 HB
Brandbaarheidsklasse (contacthouder): UL 94 HB
Artikelomschrijving: RKT 4-602/10 M
Isolatieweerstand kabel: min 1500 MOhm x km
Isolatieweerstand: ˃ 10^9 Ohm
Geïsoleerde draaddiameter: ø 1.80 ± 0.05 mm
Brandbaarheidsklasse (kabelmantel): DIN EN 60332-1-2, VDE 0482-332-1-2, IEC 60332-1-2, UL-VW1, CSA FT1
Contactweerstand: ≤ 10 mOhm
Contactcoating: Cu/Au
Materiaal contacthouder (#1): TPU
Aandraaimoment (bevestiging): M 12x1: (50-60) Ncm, hand-tight
Ontwerpstandaard: IEC 61076-2-101
Uniek Nr.: aut39500