M12 Standard Sensor/Actuator Enkele Kabel
€ 13,75
Prijzen excl. BTW en excl. verzendkosten
Verzonden in 1 tot 3 werkdagen
Artikelnummer:
RST 5-296/0,3 M
Fabrikantnummer:
4229
EAN:
04001088026575
Merk:
Lumberg Automation
Minimale bestelhoeveelheid:
10
Productinformatie
De M12 Standard Sensor/Actuator Enkele Kabel is een veelzijdige en betrouwbare connector voor verschillende sensor- en actuator toepassingen. Deze mannelijke, rechte, 5-pins, A-gecodeerde kabelset wordt geleverd met een doorschijnend lichaam en is geschikt voor 50 V AC / 60 V DC met een stroomsterkte van 4 A. De bijgevoegde zwarte PVC-kabel heeft 5 aders met een geleidergrootte van 0,34 mm², wat zorgt voor een duurzame en stabiele verbinding. De kabelset heeft een hoge contactweerstand, isolatieweerstand en een verscheidenheid aan temperatuurbereiken voor zowel gebruik als installatie, wat robuuste prestaties in diverse omgevingen garandeert. Bovendien is de afscherming ongeafschermd, en voldoet deze aan IEC 61076-2-101 normen, waardoor het een zeer betrouwbare keuze is voor automatiseringssystemen.
Downloads
Specificaties
| Draad kleur 05, zijde 1: | grey |
|---|---|
| Draad kleur 04, zijde 1: | black |
| Draad kleur 03, zijde 1: | blue |
| Draad kleur 02, zijde 1: | white |
| Draad kleur 01, zijde 1: | brown |
| Artikelnummer (#1): | 4229 |
| Overvoltage Category: | III acc. to DIN EN 60664-1 (VDE 0110-1) |
| Opmerking: | Do not connect or disconnect under load. |
| Vormdeelmateriaal: | TPU |
| Vormdeelkleur: | Translucent |
| Minimale buigradius (flexibele installatie): | ˃ 10 x D |
| Minimale buigradius (vaste installatie): | ˃ 5 x D |
| Koppelcycli: | ≤ 100 |
| Opmerking vermogensreductie: | Notice derating |
| Bedrijfsspanning: | 50 V AC / 60 V DC |
| Bedrijfstemperatuur (UL): | max. + 50 °C |
| Oliebestendigheid: | Good chemical and oil resistance |
| Aantal draden: | 5 |
| Aantal pinnen: | 5 |
| UL-keurmerk: | UL 2238; cURus |
| Type contact / Geslacht: | Male |
| Afscherming: | Unshielded |
| UL-kabeltype: | AWM: 2464 |
| UL-bestand: | E315587 |
| Draadisolatiemateriaal: | PVC class 43 |
| RoHS-conform: | yes |
| Producttype: | Assemblies & Patch cords |
| Productsubfamilie: | M12 Standard |
| Productfamillie: | Sensor / Actuator Connectors |
| Vervuilingsgraad: | 3 acc. to DIN EN 60664-1 (VDE 0110-1) |
| Opmerking beschermingsgraad / IP-classificatie: | ** only if mounted and locked in combination with Hirschmann / Lumberg Automation connector. |
| Nominale spanning (UL): | 30 V AC/DC |
| Nominale spanning: | 60 V |
| Nominale impuls-spanning: | 1.5 kV |
| Nominale stroom*: | 4 A |
| Nominale stroom (UL)*: | 4 A |
| Beschermingsgraad / IP-classificatie**: | IP65, IP67 |
| Kleur contacthouder: | Orange |
| Kabelnummer: | 296 |
| Kabellengte: | 0.3 m |
| Codering: | A |
| Contact basismateriaal (#1): | CuSn |
| Connectortype: | Cordset, single ended |
| Connectorontwerp: | straight |
| Geleidermateriaal: | Cu |
| Geleidergrootte: | 0.34 mm² |
| Materiaal kabelmantel: | PVC class 43 |
| Kleur kabelmantel: | black |
| Omgevingstemperatuur (flexibele installatie): | + 5 °C - + 80 °C |
| Omgevingstemperatuur (vaste installatie): | - 40 °C - + 80 °C |
| Omgevingstemperatuur (drag chain installatie): | + 5 °C - + 60 °C |
| Omgevingstemperatuur (bedrijf)*: | - 40 °C - + 90 °C |
| Kabeldiameter D: | ø 5.70 ± 0.20 mm |
| Kabeleigenschappen: | Free of lacquer wetting disturbing substances; Exclusion of silicone |
| Bevestigingstype: | Coupling Screw |
| Oppervlaktebehandeling bevestiging: | Nickel-plated |
| Bevestigingsmateriaal: | CuZn |
| Lange omschrijving (#1): | M12 Standard Sensor/Actuator Single-Ended Cordset: Male, straight, 5-pin, A-coded, translucent body, 50 V AC / 60 V DC, 4 A; PVC black cable, 5-wires, 0.34 mm² |
| Brandbaarheidsklasse (vormdeel): | UL 94 HB |
| Brandbaarheidsklasse (contacthouder): | UL 94 HB |
| Artikelomschrijving: | RST 5-296/0,3 M |
| Isolatieweerstand kabel: | min 1000 MOhm x km |
| Isolatieweerstand: | ˃ 10^9 Ohm |
| Geïsoleerde draaddiameter: | ø 1.50 mm |
| Brandbaarheidsklasse (kabelmantel): | DIN EN 60332-1-2, VDE 0482-332-1-2, IEC 60332-1-2, UL VW-1 |
| Contactweerstand: | ≤ 10 mOhm |
| Contactcoating: | Cu/Au |
| Materiaal contacthouder (#1): | TPU-GF |
| Buigcycli: | ˃ 1 M |
| Aandraaimoment (bevestiging): | M 12x1: (50-60) Ncm, hand-tight |
| Ontwerpstandaard: | IEC 61076-2-101 |
| Uniek Nr.: | aut4229 |