Ga naar de hoofdinhoud Ga naar de zoekopdracht Ga naar de hoofdnavigatie
usp icon Meer dan 50 jaar kennis en ervaring
usp icon Ruim 10.000 producten op voorraad
usp icon Snelle levering

Productinformatie

De M12 Standaard Sensor-/Actuator Enkelzijdige Kabelset is ontworpen voor robuuste connectiviteit in veeleisende omgevingen. Deze kabelset heeft een mannelijke, rechte, 4-pin, A-gecodeerde transparante connector, die een veilige en efficiënte verbinding biedt. Hij werkt op 230 V AC/DC met een stroomcapaciteit van 4 A. Verpakt in een duurzame PUR zwarte kabel, bevat hij drie draden met een doorsnede van 0,34 mm². Het ontwerp is geoptimaliseerd voor hoge prestaties met uitstekende weerstand tegen chemicaliën, oliën, microben en hydrolyse, terwijl het halogeenvrij is. Ontworpen om omgevingstemperaturen van -40 °C tot +90 °C te weerstaan, voldoet het aan verschillende IP-classificaties, waaronder IP65, IP67, IP68 en IP69K, wat bescherming tegen stof en vocht garandeert.

Downloads

Specificaties

Draad kleur 04, zijde 1: black
Draad kleur 03, zijde 1: blue
Draad kleur 01, zijde 1: brown
Artikelnummer (#1): 71568
Overvoltage Category: II acc. to DIN EN 60664-1 (VDE 0110-1)
Opmerking: Do not connect or disconnect under load.
Vormdeelmateriaal: TPU
Vormdeelkleur: Translucent
Minimale buigradius (flexibele installatie): ˃ 10 x D
Minimale buigradius (vaste installatie): ˃ 5 x D
Koppelcycli: ≤ 100
Opmerking vermogensreductie: Notice derating
Bedrijfsspanning: 230 V AC/DC
Bedrijfstemperatuur (UL): max. + 50 °C
Oliebestendigheid: Good chemical and oil resistance
Aantal draden: 3
Aantal pinnen: 4
UL-keurmerk: UL 2238; cURus
Type contact / Geslacht: Male
Afscherming: Unshielded
UL-kabeltype: AWM: 20549
UL-bestand: E315587
Draadisolatiemateriaal: PP
RoHS-conform: yes
Producttype: Assemblies & Patch cords
Productsubfamilie: M12 Standard
Productfamillie: Sensor / Actuator Connectors
Vervuilingsgraad: 3 acc. to DIN EN 60664-1 (VDE 0110-1)
Opmerking beschermingsgraad / IP-classificatie: ** only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.
Nominale spanning (UL): 250 V AC
Nominale spanning: 250 V
Nominale impuls-spanning: 2.5 kV
Nominale stroom*: 4 A
Nominale stroom (UL)*: 4 A
Beschermingsgraad / IP-classificatie**: IP65, IP67, IP68 (1 m / 24 h), IP69K
Kleur contacthouder: Orange
Kabelnummer: 224
Kabellengte: 1.5 m
Codering: A
Contact basismateriaal (#1): CuSn
Connectortype: Cordset, single ended
Connectorontwerp: straight
Geleidermateriaal: Cu
Geleidergrootte: 0.34 mm²
Materiaal kabelmantel: PUR
Kleur kabelmantel: black matt similarly RAL 9005
Omgevingstemperatuur (flexibele installatie): - 25 °C - + 80 °C
Omgevingstemperatuur (vaste installatie): - 50 °C - + 80 °C
Omgevingstemperatuur (drag chain installatie): - 25 °C - + 60 °C
Omgevingstemperatuur (bedrijf)*: - 40 °C - + 90 °C
Kabeldiameter D: ø 4.30 ± 0.20 mm
Kabeleigenschappen: Good microbes and hydrolysis resistance; Mainly plasticizer diffusion free; Exclusion of PVC and silicone; Free of lacquer wetting disturbing substances; Coldness flexibility
Bevestigingstype: Coupling Screw
Oppervlaktebehandeling bevestiging: Nickel-plated
Bevestigingsmateriaal: CuZn
Lange omschrijving (#1): M12 Standard Sensor/Actuator Single-Ended Cordset: Male, straight, 4-pin, A-coded, translucent body, 230 V AC/DC, 4 A; PUR black cable, 3-wires, 0.34 mm²
Halogeenvrij: DIN EN 50267-2-1, IEC 60754-1, VDE 0482-267-2-1
Brandbaarheidsklasse (vormdeel): UL 94 HB
Brandbaarheidsklasse (contacthouder): UL 94 HB
Artikelomschrijving: RST 3-224/1,5 M
Isolatieweerstand kabel: min 1000 MOhm x km
Isolatieweerstand: ˃ 10^9 Ohm
Geïsoleerde draaddiameter: ø 1.30 ± 0.10 mm
Brandbaarheidsklasse (kabelmantel): DIN EN 50265-2-2, VDE 0482-265-2-2, IEC 60332-2-2, CSA FT2
Contactweerstand: ≤ 10 mOhm
Contactcoating: Cu/Au
Materiaal contacthouder (#1): TPU-GF
Buigcycli: ˃ 5 M
Aandraaimoment (bevestiging): M 12x1: (50-60) Ncm, hand-tight
Ontwerpstandaard: IEC 61076-2-101
Torsiecycli: ˃ 5 M @ ± 360 °/1 m
Uniek Nr.: aut71568