Ga naar de hoofdinhoud Ga naar de zoekopdracht Ga naar de hoofdnavigatie
usp icon Meer dan 50 jaar kennis en ervaring
usp icon Ruim 10.000 producten op voorraad
usp icon Snelle levering

Productinformatie

De M12 Standaard Sensor/Actuator Enkelzijdige Kabelset is ontworpen voor betrouwbare verbindingen in veeleisende omgevingen. Deze kabelset heeft een 4-polige, hoekige, vrouwelijke connector die A-gecodeerd is voor veilige verbindingen. Het doorschijnende lichaam en de geïntegreerde 3xLEDs (PNP) zorgen voor eenvoudige statusbewaking. Hij werkt binnen een spanningsbereik van 10-30 V DC en kan stromen tot 4 A aan. De set bevat een duurzame PUR grijze kabel met vier draden (0,34 mm²), die uitstekende prestaties en flexibiliteit garandeert. Met een IP65, IP67, IP68 en IP69K beschermingsgraad is hij geschikt voor gebruik in zware industriële omgevingen.

Downloads

Specificaties

Draad kleur 04, zijde 1: black
Draad kleur 03, zijde 1: blue
Draad kleur 02, zijde 1: white
Draad kleur 01, zijde 1: brown
Artikelnummer (#1): 109083
Overvoltage Category: III acc. to DIN EN 60664-1 (VDE 0110-1)
Opmerking: Do not connect or disconnect under load.
Vormdeelmateriaal: TPU
Vormdeelkleur: Translucent
Minimale buigradius (flexibele installatie): ˃ 10 x D
Minimale buigradius (vaste installatie): ˃ 5 x D
Koppelcycli: ≤ 100
Opmerking vermogensreductie: Notice derating
Bedrijfsspanning: 10-30 V DC
Bedrijfstemperatuur (UL): max. + 50 °C
Oliebestendigheid: Good chemical and oil resistance
O-ringmateriaal: FKM, green
Aantal draden: 4
Aantal pinnen: 4
UL-keurmerk: UL 2238; cURus
Type contact / Geslacht: female
Afscherming: Unshielded
UL-kabeltype: AWM: 20549
UL-bestand: E315587
Draadisolatiemateriaal: PP
RoHS-conform: yes
Producttype: Assemblies & Patch cords
Productsubfamilie: M12 Standard
Productfamillie: Sensor / Actuator Connectors
Vervuilingsgraad: 3 acc. to DIN EN 60664-1 (VDE 0110-1)
Opmerking beschermingsgraad / IP-classificatie: ** only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.
Nominale spanning (UL): 10-30 V DC
Nominale spanning: 30 V
Nominale impuls-spanning: 0.8 kV
Nominale stroom*: 4 A
Nominale stroom (UL)*: 4 A
Beschermingsgraad / IP-classificatie**: IP65, IP67, IP68 (1 m / 24 h), IP69K
Kleur contacthouder: Orange
Kabelnummer: 265
Kabellengte: 20 m
Codering: A
Contact basismateriaal (#1): CuSn
Connectortype: Cordset, single ended
Connectorontwerp: angled
Geleidermateriaal: Cu
Geleidergrootte: 0.34 mm²
Materiaal kabelmantel: PUR
Kleur kabelmantel: grey matt similarly RAL 7040
Omgevingstemperatuur (flexibele installatie): - 25 °C - + 80 °C (UL: + 80 °C)
Omgevingstemperatuur (vaste installatie): - 50 °C - + 90 °C (UL: + 80 °C)
Omgevingstemperatuur (drag chain installatie): - 25 °C - + 60 °C
Omgevingstemperatuur (bedrijf)*: - 40 °C - + 90 °C
Kabeldiameter D: ø 4.70 ± 0.20 mm
Kabeleigenschappen: Good microbes and hydrolysis resistance; Mainly plasticizer diffusion free; Exclusion of PVC and silicone; Free of lacquer wetting disturbing substances; Coldness flexibility
Bevestigingstype: Coupling Nut
Oppervlaktebehandeling bevestiging: Nickel-plated
Bevestigingsmateriaal: CuZn
Lange omschrijving (#1): M12 Standard Sensor/Actuator Single-Ended Cordset: Female, angled, 4-pin, A-coded, translucent body, 10-30 V DC, 4 A, with 3xLEDs (PNP); PUR grey cable, 4-wires, 0.34 mm²
Halogeenvrij: DIN EN 50267-2-1, IEC 60754-1, VDE 0482-267-2-1
Functie-indicator: 3xLEDs (PNP)
Brandbaarheidsklasse (vormdeel): UL 94 HB
Brandbaarheidsklasse (contacthouder): UL 94 HB
Artikelomschrijving: RKWT/LED P 4-265/20 M
Isolatieweerstand kabel: min 1000 MOhm x km
Isolatieweerstand: ˃ 10^9 Ohm
Geïsoleerde draaddiameter: ø 1.30 ± 0.10 mm
Brandbaarheidsklasse (kabelmantel): DIN EN 60332-2-2, VDE 0482-332-2-2, IEC 60332-2-2, CSA FT-2
Contactweerstand: ≤ 10 mOhm
Contactcoating: Cu/Au
Materiaal contacthouder (#1): TPU
Buigcycli: ˃ 2 M
Aandraaimoment (bevestiging): M 12x1: (50-60) Ncm, hand-tight
Ontwerpstandaard: IEC 61076-2-101
Uniek Nr.: aut109083