M12 Standaard Sensor/Actuator Enkelzijdige Kabel
€ 28,15
Prijzen excl. BTW en excl. verzendkosten
Verzonden in 1 tot 3 werkdagen
Artikelnummer:
RST 4-265/10 M
Fabrikantnummer:
81994
EAN:
04020841639289
Merk:
Lumberg Automation
Minimale bestelhoeveelheid:
10
Productinformatie
De M12 Standaard Sensor/Actuator Enkelzijdige Kabel is ontworpen voor betrouwbare verbindingen in automatiseringssystemen. Deze mannelijke, rechte, 4-pins, A-gecodeerde kabel heeft een duurzaam transparant lichaam en werkt efficiënt op 230 V AC/DC en 4 A. De grijze 4-aderige PUR-kabel met een geleidergrootte van 0.34 mm² zorgt voor duurzaamheid en optimale prestaties. Dankzij de hoge weerstand tegen chemicaliën, olie en omgevingsfactoren is deze kabel geschikt voor verschillende industriële omgevingen. De kabel heeft een IP65, IP67, IP68 en IP69K classificatie, wat zorgt voor robuuste bescherming en duurzaamheid.
Downloads
Specificaties
| Draad kleur 04, zijde 1: | black |
|---|---|
| Draad kleur 03, zijde 1: | blue |
| Draad kleur 02, zijde 1: | white |
| Draad kleur 01, zijde 1: | brown |
| Artikelnummer (#1): | 81994 |
| Overvoltage Category: | II acc. to DIN EN 60664-1 (VDE 0110-1) |
| Opmerking: | Do not connect or disconnect under load. |
| Vormdeelmateriaal: | TPU |
| Vormdeelkleur: | Translucent |
| Minimale buigradius (flexibele installatie): | ˃ 10 x D |
| Minimale buigradius (vaste installatie): | ˃ 5 x D |
| Koppelcycli: | ≤ 100 |
| Opmerking vermogensreductie: | Notice derating |
| Bedrijfsspanning: | 230 V AC/DC |
| Bedrijfstemperatuur (UL): | max. + 50 °C |
| Oliebestendigheid: | Good chemical and oil resistance |
| Aantal draden: | 4 |
| Aantal pinnen: | 4 |
| UL-keurmerk: | UL 2238; cURus |
| Type contact / Geslacht: | Male |
| Afscherming: | Unshielded |
| UL-kabeltype: | AWM: 20549 |
| UL-bestand: | E315587 |
| Draadisolatiemateriaal: | PP |
| RoHS-conform: | yes |
| Producttype: | Assemblies & Patch cords |
| Productsubfamilie: | M12 Standard |
| Productfamillie: | Sensor / Actuator Connectors |
| Vervuilingsgraad: | 3 acc. to DIN EN 60664-1 (VDE 0110-1) |
| Opmerking beschermingsgraad / IP-classificatie: | ** only if mounted and locked in combination with Hirschmann / Lumberg Automation connector. |
| Nominale spanning (UL): | 250 V AC |
| Nominale spanning: | 250 V |
| Nominale impuls-spanning: | 2.5 kV |
| Nominale stroom*: | 4 A |
| Nominale stroom (UL)*: | 4 A |
| Beschermingsgraad / IP-classificatie**: | IP65, IP67, IP68 (1 m / 24 h), IP69K |
| Kleur contacthouder: | Orange |
| Kabelnummer: | 265 |
| Kabellengte: | 10 m |
| Codering: | A |
| Contact basismateriaal (#1): | CuSn |
| Connectortype: | Cordset, single ended |
| Connectorontwerp: | straight |
| Geleidermateriaal: | Cu |
| Geleidergrootte: | 0.34 mm² |
| Materiaal kabelmantel: | PUR |
| Kleur kabelmantel: | grey matt similarly RAL 7040 |
| Omgevingstemperatuur (flexibele installatie): | - 25 °C - + 80 °C (UL: + 80 °C) |
| Omgevingstemperatuur (vaste installatie): | - 50 °C - + 90 °C (UL: + 80 °C) |
| Omgevingstemperatuur (drag chain installatie): | - 25 °C - + 60 °C |
| Omgevingstemperatuur (bedrijf)*: | - 40 °C - + 90 °C |
| Kabeldiameter D: | ø 4.70 ± 0.20 mm |
| Kabeleigenschappen: | Good microbes and hydrolysis resistance; Mainly plasticizer diffusion free; Exclusion of PVC and silicone; Free of lacquer wetting disturbing substances; Coldness flexibility |
| Bevestigingstype: | Coupling Screw |
| Oppervlaktebehandeling bevestiging: | Nickel-plated |
| Bevestigingsmateriaal: | CuZn |
| Lange omschrijving (#1): | M12 Standard Sensor/Actuator Single-Ended Cordset: Male, straight, 4-pin, A-coded, translucent body, 230 V AC/DC, 4 A; PUR grey cable, 4-wires, 0.34 mm² |
| Halogeenvrij: | DIN EN 50267-2-1, IEC 60754-1, VDE 0482-267-2-1 |
| Brandbaarheidsklasse (vormdeel): | UL 94 HB |
| Brandbaarheidsklasse (contacthouder): | UL 94 HB |
| Artikelomschrijving: | RST 4-265/10 M |
| Isolatieweerstand kabel: | min 1000 MOhm x km |
| Isolatieweerstand: | ˃ 10^9 Ohm |
| Geïsoleerde draaddiameter: | ø 1.30 ± 0.10 mm |
| Brandbaarheidsklasse (kabelmantel): | DIN EN 60332-2-2, VDE 0482-332-2-2, IEC 60332-2-2, CSA FT-2 |
| Contactweerstand: | ≤ 10 mOhm |
| Contactcoating: | Cu/Au |
| Materiaal contacthouder (#1): | TPU |
| Buigcycli: | ˃ 2 M |
| Aandraaimoment (bevestiging): | M 12x1: (50-60) Ncm, hand-tight |
| Ontwerpstandaard: | IEC 61076-2-101 |
| Uniek Nr.: | aut81994 |