M12 Standaard Sensor/Actuator Enkellopend Aansluitsnoer
€ 23,65
Prijzen excl. BTW en excl. verzendkosten
Verzonden in 1 tot 3 werkdagen
Artikelnummer:
RST 5-87/2 M
Fabrikantnummer:
15792
EAN:
04020841032592
Merk:
Lumberg Automation
Minimale bestelhoeveelheid:
10
Productinformatie
De M12 Standaard Sensor/Actuator Enkellopend Aansluitsnoer is ontworpen voor betrouwbare connectiviteit in industriële omgevingen. Het beschikt over een mannelijke, rechte, 5-polige A-gecodeerde connector, die stabiele prestaties levert bij 50V AC/60V DC, 4A. Het lichaam is doorzichtig voor gemakkelijke zichtbaarheid en wordt geleverd met een duurzame zwarte PUR-kabel, bestaande uit 5 draden met een doorsnede van 0,34 mm². Dit aansluitsnoer zorgt voor een veilige en efficiënte verbinding, met een koppelingsschroefaansluiting en ongeaarde ontwerp voor veelzijdigheid. Het is ideaal voor sensor- en actuatorapplicaties en voldoet aan de IP65, IP67, IP68 en IP69K beschermingsnormen, wat het bestand maakt tegen stof, water en hogedrukreiniging. Het snoer is ook RoHS-conform en biedt uitstekende bestendigheid tegen olie, microben en hydrolyse, wat zorgt voor duurzaamheid en betrouwbaarheid in veeleisende industriële omgevingen.
Downloads
Specificaties
| Draad kleur 05, zijde 1: | green-yellow |
|---|---|
| Draad kleur 04, zijde 1: | black |
| Draad kleur 03, zijde 1: | blue |
| Draad kleur 02, zijde 1: | white |
| Draad kleur 01, zijde 1: | brown |
| Artikelnummer (#1): | 15792 |
| Overvoltage Category: | III acc. to DIN EN 60664-1 (VDE 0110-1) |
| Opmerking: | Do not connect or disconnect under load. |
| Vormdeelmateriaal: | TPU |
| Vormdeelkleur: | Translucent |
| Minimale buigradius (flexibele installatie): | ˃ 10 x D |
| Minimale buigradius (vaste installatie): | ˃ 5 x D |
| Koppelcycli: | ≤ 100 |
| Opmerking vermogensreductie: | Notice derating |
| Bedrijfsspanning: | 50 V AC / 60 V DC |
| Oliebestendigheid: | TM5 HD21.1 S4 |
| Aantal draden: | 5 |
| Aantal pinnen: | 5 |
| Type contact / Geslacht: | Male |
| Afscherming: | Unshielded |
| Draadisolatiemateriaal: | PVC TI2 |
| RoHS-conform: | yes |
| Producttype: | Assemblies & Patch cords |
| Productsubfamilie: | M12 Standard |
| Productfamillie: | Sensor / Actuator Connectors |
| Vervuilingsgraad: | 3 acc. to DIN EN 60664-1 (VDE 0110-1) |
| Opmerking beschermingsgraad / IP-classificatie: | ** only if mounted and locked in combination with Hirschmann / Lumberg Automation connector. |
| Nominale spanning: | 60 V |
| Nominale impuls-spanning: | 1.5 kV |
| Nominale stroom*: | 4 A |
| Beschermingsgraad / IP-classificatie**: | IP65, IP67, IP68 (1 m / 24 h), IP69K |
| Kleur contacthouder: | Orange |
| Kabelnummer: | 087 |
| Kabellengte: | 2 m |
| Codering: | A |
| Contact basismateriaal (#1): | CuSn |
| Connectortype: | Cordset, single ended |
| Connectorontwerp: | straight |
| Geleidermateriaal: | Cu |
| Geleidergrootte: | 0.34 mm² |
| Materiaal kabelmantel: | PUR |
| Kleur kabelmantel: | black matt similarly RAL 9005 |
| Omgevingstemperatuur (flexibele installatie): | - 20 °C - + 80 °C |
| Omgevingstemperatuur (vaste installatie): | - 40 °C - + 80 °C |
| Omgevingstemperatuur (bedrijf)*: | - 40 °C - + 90 °C |
| Kabeldiameter D: | ø 5.50 ± 0.20 mm |
| Kabeleigenschappen: | Good microbes and hydrolysis resistance; Mainly plasticizer diffusion free; LABS-free of lacquer wetting disturbing substances; Exclusion of silicone |
| Bevestigingstype: | Coupling Screw |
| Oppervlaktebehandeling bevestiging: | Nickel-plated |
| Bevestigingsmateriaal: | CuZn |
| Lange omschrijving (#1): | M12 Standard Sensor/Actuator Single-Ended Cordset: Male, straight, 5-pin, A-coded, translucent body, 50 V AC / 60 V DC, 4 A; PUR black cable, 5-wires, 0.34 mm² |
| Brandbaarheidsklasse (vormdeel): | UL 94 HB |
| Brandbaarheidsklasse (contacthouder): | UL 94 HB |
| Artikelomschrijving: | RST 5-87/2 M |
| Isolatieweerstand kabel: | min 100 MOhm x km |
| Isolatieweerstand: | ˃ 10^9 Ohm |
| Geïsoleerde draaddiameter: | ø 1.40 ± 0.05 mm |
| Brandbaarheidsklasse (kabelmantel): | DIN EN 60332-1-2, VDE 0482-332-1-2, IEC 60332-1-2 |
| Contactweerstand: | ≤ 10 mOhm |
| Contactcoating: | Cu/Au |
| Materiaal contacthouder (#1): | TPU-GF |
| Aandraaimoment (bevestiging): | M 12x1: (50-60) Ncm, hand-tight |
| Ontwerpstandaard: | Pin assignment deviating from IEC 61076-2-101 and IEC 61140 |
| Uniek Nr.: | aut15792 |