Ga naar de hoofdinhoud Ga naar de zoekopdracht Ga naar de hoofdnavigatie
usp icon Meer dan 50 jaar kennis en ervaring
usp icon Ruim 10.000 producten op voorraad
usp icon Snelle levering

Productinformatie

De M12 Standaard Sensor/Aanvoerder Enkelzijdige Kabel is ontworpen voor industriële connectiviteit en beschikt over een robuuste, mannelijke, gehoekte, 5-pins, A-gecodeerde connector. Ideaal voor veeleisende omgevingen, ondersteunt het een bedrijfsspanning van 50 V AC / 60 V DC en een stroomsterkte van 4 A. De doorschijnende behuizing biedt zichtbaarheid en gemakkelijke probleemoplossing, terwijl de zwarte PUR-kabel met 5 draden duurzaamheid en flexibiliteit garandeert. Met een IP65 tot IP69K bescherming kan deze kabel zware omstandigheden aan en biedt betrouwbare prestaties in een temperatuurbereik van -40°C tot +90°C. Ideaal voor automatiseringssystemen, voldoet deze kabel aan de IEC 61076-2-101 normen, wat compatibiliteit en veiligheid verzekert.

Downloads

Specificaties

Draad kleur 05, zijde 1: grey
Draad kleur 04, zijde 1: black
Draad kleur 03, zijde 1: blue
Draad kleur 02, zijde 1: white
Draad kleur 01, zijde 1: brown
Artikelnummer (#1): 107977
Overvoltage Category: III acc. to DIN EN 60664-1 (VDE 0110-1)
Opmerking: Do not connect or disconnect under load.
Vormdeelmateriaal: TPU
Vormdeelkleur: Translucent
Minimale buigradius (flexibele installatie): ˃ 10 x D
Minimale buigradius (vaste installatie): ˃ 5 x D
Koppelcycli: ≤ 100
Opmerking vermogensreductie: Notice derating
Bedrijfsspanning: 50 V AC / 60 V DC
Bedrijfstemperatuur (UL): max. + 50 °C
Aantal draden: 5
Aantal pinnen: 5
UL-keurmerk: UL 2238; cURus
Type contact / Geslacht: Male
Afscherming: Unshielded
UL-kabeltype: AWM: 20549
UL-bestand: E315587
Draadisolatiemateriaal: PP
RoHS-conform: yes
Producttype: Assemblies & Patch cords
Productsubfamilie: M12 Standard
Productfamillie: Sensor / Actuator Connectors
Vervuilingsgraad: 3 acc. to DIN EN 60664-1 (VDE 0110-1)
Opmerking beschermingsgraad / IP-classificatie: ** only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.
Nominale spanning (UL): 30 V AC/DC
Nominale spanning: 60 V
Nominale impuls-spanning: 1.5 kV
Nominale stroom*: 4 A
Nominale stroom (UL)*: 4 A
Beschermingsgraad / IP-classificatie**: IP65, IP67, IP68 (1 m / 24 h), IP69K
Kleur contacthouder: Orange
Kabelnummer: 293
Kabellengte: 0.5 m
Codering: A
Contact basismateriaal (#1): CuSn
Connectortype: Cordset, single ended
Connectorontwerp: angled
Geleidermateriaal: Cu
Geleidergrootte: 0.34 mm²
Materiaal kabelmantel: PUR
Kleur kabelmantel: black matt similarly RAL 9005
Omgevingstemperatuur (flexibele installatie): - 25 °C - + 90 °C (UL: + 80 °C)
Omgevingstemperatuur (vaste installatie): - 50 °C - + 90 °C (UL: + 80 °C)
Omgevingstemperatuur (drag chain installatie): - 25 °C - + 60 °C
Omgevingstemperatuur (bedrijf)*: - 40 °C - + 90 °C
Kabeldiameter D: ø 5.0 ± 0.20 mm
Kabeleigenschappen: Good microbes and hydrolysis resistance; Mainly plasticizer diffusion free; Exclusion of PVC and silicone; Free of lacquer wetting disturbing substances; Coldness flexibility
Bevestigingstype: Coupling Screw
Oppervlaktebehandeling bevestiging: Nickel-plated
Bevestigingsmateriaal: CuZn
Lange omschrijving (#1): M12 Standard Sensor/Actuator Single-Ended Cordset: Male, angled, 5-pin, A-coded, translucent body, 50 V AC / 60 V DC, 4 A; PUR black cable, 5-wires, 0.34 mm²
Halogeenvrij: DIN EN 50267-2-1, IEC 60754-1, VDE 0482-267-2-1
Brandbaarheidsklasse (vormdeel): UL 94 HB
Brandbaarheidsklasse (contacthouder): UL 94 HB
Artikelomschrijving: RSWT 5-293/0,5 M
Isolatieweerstand kabel: min 1000 MOhm x km
Isolatieweerstand: ˃ 10^9 Ohm
Geïsoleerde draaddiameter: ø 1.30 ± 0.10 mm
Brandbaarheidsklasse (kabelmantel): DIN EN 60332-2-2, VDE 0482-332-2-2, IEC 60332-2-2, CSA FT-2
Contactweerstand: ≤ 10 mOhm
Contactcoating: Cu/Au
Materiaal contacthouder (#1): TPU-GF
Buigcycli: ˃ 5 M
Aandraaimoment (bevestiging): M 12x1: (50-60) Ncm, hand-tight
Ontwerpstandaard: IEC 61076-2-101
Torsiecycli: ˃ 5 M @ ± 360 °/1 m
Uniek Nr.: aut107977