Ga naar de hoofdinhoud Ga naar de zoekopdracht Ga naar de hoofdnavigatie
usp icon Meer dan 50 jaar kennis en ervaring
usp icon Ruim 10.000 producten op voorraad
usp icon Snelle levering

Productinformatie

De M12 F&B (Wash-Down) Sensor/Actuator Enkelzijdige Cordset is ontworpen voor robuuste industriële toepassingen. Met een vrouwelijke, haakse, 4-polige connector en A-gecodeerde transparante behuizing werkt hij binnen een bereiken 10-30 V DC en heeft hij een stroomcapaciteit tot 4 A. Het heeft drie geïntegreerde LEDs (PNP) voor duidelijke signaalindicatie. De duurzame oranje TPE-kabel heeft 4 draden (0,25 mm²) en zorgt voor betrouwbare verbindingen. Met een beschermingsklasse van IP65, IP67, IP68 en IP69K is hij ideaal voor omgevingen die hoge niveaus van hygiëne en weerstand tegen chemicaliën en olie vereisen.

Downloads

Specificaties

Draad kleur 04, zijde 1: black
Draad kleur 03, zijde 1: blue
Draad kleur 02, zijde 1: white
Draad kleur 01, zijde 1: brown
Artikelnummer (#1): 10502
Overvoltage Category: III acc. to DIN EN 60664-1 (VDE 0110-1)
Opmerking: Do not connect or disconnect under load.
Vormdeelmateriaal: PP-GF
Vormdeelkleur: Transparent
Minimale buigradius (flexibele installatie): ˃ 10 x D
Minimale buigradius (vaste installatie): ˃ 5 x D
Koppelcycli: ≤ 100
Opmerking vermogensreductie: Notice derating
Bedrijfsspanning: 10-30 V DC
Bedrijfstemperatuur (UL): max. + 65 °C
Oliebestendigheid: Good chemical and oil resistance
O-ringmateriaal: EPDM, black
Aantal draden: 4
Aantal pinnen: 4
UL-keurmerk: UL 2238; cURus
Type contact / Geslacht: female
Afscherming: Unshielded
UL-kabeltype: AWM: 21484
UL-bestand: E315587
Draadisolatiemateriaal: PP
RoHS-conform: yes
Producttype: Assemblies & Patch cords
Productsubfamilie: M12 F&B (Wash-Down)
Productfamillie: Sensor / Actuator Connectors
Vervuilingsgraad: 3 acc. to DIN EN 60664-1 (VDE 0110-1)
Opmerking beschermingsgraad / IP-classificatie: ** only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.
Nominale spanning (UL): 30 V AC/DC
Nominale spanning: 30 V
Nominale impuls-spanning: 0.8 kV
Nominale stroom*: 4 A
Nominale stroom (UL)*: 4 A
Beschermingsgraad / IP-classificatie**: IP65, IP67, IP68 (1 m / 24 h), IP69K
Kleur contacthouder: white
Kabelnummer: 521
Kabellengte: 10 m
Codering: A
Contact basismateriaal (#1): CuSn
Connectortype: Cordset, single ended
Connectorontwerp: angled
Geleidermateriaal: Cu
Geleidergrootte: 0.25 mm²
Materiaal kabelmantel: TPE-V-compound, flame retardent
Kleur kabelmantel: orange
Omgevingstemperatuur (flexibele installatie): - 25 °C - + 90 °C
Omgevingstemperatuur (vaste installatie): - 40 °C - + 90 °C
Omgevingstemperatuur (drag chain installatie): - 25 °C - + 60 °C
Omgevingstemperatuur (bedrijf)*: - 40 °C - + 105 °C
Kabeldiameter D: ø 4.7 ± 0.20 mm
Kabeleigenschappen: Free of silicone; Free of FCKW; Free offcadmium and lead; Microbe and hydrolysis resistant
Bevestigingstype: Coupling Nut
Bevestigingsmateriaal: Stainless Steel
Lange omschrijving (#1): M12 F&B (Wash-Down) Sensor/Actuator Single-Ended Cordset: Female, angled, 4-pin, A-coded, transparent body, 10-30 V DC, 4 A, with 3xLEDs (PNP); TPE orange cable, 4-wires, 0.25 mm²
Functie-indicator: 3xLEDs (PNP)
Brandbaarheidsklasse (vormdeel): UL 94 HB
Brandbaarheidsklasse (contacthouder): UL 94 HB
Artikelomschrijving: WRKWT/LED P 4-521/10 M
Isolatieweerstand kabel: min 1000 MOhm x km
Isolatieweerstand: ˃ 10^9 Ohm
Geïsoleerde draaddiameter: ø 1.25 mm
Brandbaarheidsklasse (kabelmantel): UL horizontal flame test, flame-retardant
Contactweerstand: ≤ 10 mOhm
Contactcoating: Cu/Au
Materiaal contacthouder (#1): PP-GF
Buigcycli: ˃ 2 M
Aandraaimoment (bevestiging): M 12x1: (50-60) Ncm, hand-tight
ECOLAB:
Ontwerpstandaard: IEC 61076-2-101
Uniek Nr.: aut10502