GAN210U-A0U-603
€ 20,69
Prijzen excl. BTW en excl. verzendkosten
Verzonden in 1 tot 3 werkdagen
Artikelnummer:
GAN210U-A0U-6030500
Fabrikantnummer:
934889574
EAN:
04001088041974
Merk:
Hirschmann
Minimale bestelhoeveelheid:
25
Productinformatie
De GAN210U-A0U-603 is een GAN DIN Standard Single-Ended Cordset met een Form A, 3-pins (2+1PE; PE over kabeluitgang) configuratie. Deze kabelset heeft een zwart lichaam, zonder schakelingen, en is UL 2238 goedgekeurd, naast zijn nominale spanning van 230 V AC/DC en 10 A stroomcapaciteit. Het bevat een PUR grijze kabel, die een draaddikte van 0,75 mm² biedt. De kabel toont een goede weerstand tegen microben en hydrolyse, evenals een effectieve chemische en oliebestendigheid, en behoudt zijn flexibiliteit onder koude omstandigheden. Veel voorkomende toepassingen zijn het verbinden met ventielconnectoren, waarbij beschermingsniveaus van IP65, IP67 en IP69K worden gehandhaafd. Het connectorontwerp voldoet aan de DIN EN 175301-803-A normen, wat zorgt voor robuuste prestaties in veeleisende omgevingen.
Downloads
Specificaties
| Vormdeelmateriaal: | TPE |
|---|---|
| Artikelnummer (#1): | 934889574 |
| Draad kleur 01, zijde 1: | brown |
| Draad kleur 02, zijde 1: | blue |
| Draad kleur PE, zijde 1: | green-yellow |
| Overvoltage Category: | III acc. to DIN EN 60664-1 (VDE 0110-1) |
| Opmerking: | Do not connect or disconnect under load. |
| Opmerking vermogensreductie: | Notice derating |
| Aantal pinnen: | 2+PE (PE across cable outlet) |
| Aantal draden: | 3 |
| Oliebestendigheid: | IEC 60811-404 , VDE 0472; VDE 0250 |
| Bedrijfstemperatuur (CSA): | max. + 85 °C |
| Bedrijfstemperatuur (UL): | max. + 85 °C |
| Bedrijfsspanning: | 230 V AC/DC |
| Vervuilingsgraad: | 3 acc. to DIN EN 60664-1 (VDE 0110-1) |
| Productfamillie: | Valve Connectors |
| Productsubfamilie: | GAN with cULus approval |
| RoHS-conform: | yes |
| Afscherming: | Unshielded |
| Type contact / Geslacht: | Female |
| UL-keurmerk: | UL 2238; cULus |
| UL-kabeltype: | AWM: 20549 or 21198 |
| UL-bestand: | E315587 |
| VDE-keurmerk: | yes |
| Nominale spanning (UL): | 250 V |
| Nominale spanning (CSA): | 250 V |
| Beveiligingscircuit: | No Circuitry |
| Opmerking beschermingsgraad / IP-classificatie: | ** only if mounted and locked in combination with Hirschmann / Lumberg Automation connector. |
| Beschermingsgraad / IP-classificatie**: | IP65, IP67 (IP69K: without additional gasket; max. +80 °C) |
| Nominale stroom (CSA)*: | 6 A |
| Nominale stroom (UL)*: | 6 A |
| Nominale stroom*: | 10 A |
| Nominale impuls-spanning: | 4.0 kV |
| Draadisolatiemateriaal: | PP |
| Kabelnummer: | 603 |
| Afstand tussen contacten / kruipwegafstand: | DIN EN 60664-1 (2008/01); VDE 0110-1 |
| Codering: | A |
| Geleidergrootte: | 0.75 mm² |
| Geleidermateriaal: | Cu |
| Connectorontwerp: | Angled |
| Connectortype: | Cordset, single ended |
| Contact basismateriaal (#1): | CuZn |
| Kabellengte: | 5 m |
| Materiaal kabelmantel: | PUR |
| Omgevingstemperatuur (vaste installatie): | - 50 °C - + 90 °C (UL: + 80 °C) |
| Omgevingstemperatuur (flexibele installatie): | - 25 °C - + 90 °C (UL: + 80 °C) |
| Omgevingstemperatuur (bedrijf)*: | -25 °C - +85 °C (With additional 934-887-001 gasket : -40 °C - +105 °C) |
| Bevestigingsmateriaal: | Steel, Philips combi slot |
| Bevestigingstype: | Central Screw |
| Kabeleigenschappen: | Good microbes and hydrolysis resistance; Mainly plasticizer diffusion free; good chemical and oil resistance; Exclusion of PVC and Silicone; free of lacquer wetting disturbing substances; Coldness flexibility |
| Kabeldiameter D: | ø 5.80 ± 0.20 mm |
| Kleur kabelmantel: | grey |
| Kleur contacthouder: | black |
| Materiaal contacthouder (#1): | PA GF |
| Contactcoating: | Cu/Sn |
| Halogeenvrij: | yes |
| Geïsoleerde draaddiameter: | ø 1.92 ± 0.05 mm |
| Isolatieweerstand: | ˃ 10^9 Ohm |
| Artikelomschrijving: | GAN210U-A0U-6030500 |
| Lange omschrijving (#1): | GAN DIN Standard Single-Ended Cordset: Form A, 3-pin (2+1PE; PE across cable outlet), UL 2238, black body, without circuitry, 230 V AC/DC, 10 A; PUR grey cable, 0.75 mm² |
| Koppelcycli: | ≤ 50 |
| Minimale buigradius (vaste installatie): | ˃ 5 x D |
| Minimale buigradius (flexibele installatie): | ˃ 7.5 x D |
| Afdichtingsmateriaal: | Molded Integrated Gasket |
| Contactweerstand: | ≤ 10 mOhm |
| Ontwerpstandaard: | DIN EN 175301-803-A, ISO 4400 |
| Aandraaimoment (bevestiging): | (50-60) Ncm |
| Brandbaarheidsklasse (kabelmantel): | DIN EN 60332-1-2, VDE 0482-332-1-2, IEC 60332-1-2, CSA FT2; VDE 0472 Teil 804 Prüfart B |
| Brandbaarheidsklasse (contacthouder): | UL 94 V-0 |
| Brandbaarheidsklasse (vormdeel): | UL 94 HB |
| Vormdeelkleur: | Black |
| Uniek Nr.: | hir934889574 |