Ga naar de hoofdinhoud Ga naar de zoekopdracht Ga naar de hoofdnavigatie
usp icon Meer dan 50 jaar kennis en ervaring
usp icon Ruim 10.000 producten op voorraad
usp icon Snelle levering

Productinformatie

De 1/2"-20UNF-2B Sensor/Actuator Single-Ended Cordset is ontworpen voor naadloze verbindingen tussen sensoren en actuatoren. Deze vrouwelijke, haakse, 3-pins connector heeft een U-code ontwerp, een duurzame oranje behuizing en werkt op 230 V AC/DC met een stroomsterkte van 4 A. De kabel is gemaakt van PUR, een materiaal dat bekend staat om zijn stevigheid en flexibiliteit, met een zwarte mantel met drie 0,50 mm² geleiders. Dit product garandeert betrouwbare prestaties met een beschermingsgraad van IP65, IP67 en IP69K, waardoor het geschikt is voor veeleisende industriële omgevingen. Zijn weerstand tegen oliën, koelmiddelen en trillingen verbetert de robuustheid verder.

Downloads

Specificaties

Draad kleur 03, zijde 1: blue
Draad kleur 02, zijde 1: brown
Draad kleur 01, zijde 1: green-yellow
Artikelnummer (#1): 80489
Overvoltage Category: II acc. to DIN EN 60664-1 (VDE 0110-1)
Opmerking: Do not connect or disconnect under load.
Vormdeelmateriaal: TPU
Vormdeelkleur: orange
Minimale buigradius (flexibele installatie): ˃ 10 x D
Minimale buigradius (vaste installatie): ˃ 5 x D
Koppelcycli: ≤ 100
Opmerking vermogensreductie: Notice derating
Bedrijfsspanning: 230 V AC/DC
Bedrijfstemperatuur (UL): max. + 50 °C
Oliebestendigheid: Good chemical and oil resistance
Aantal draden: 3
Aantal pinnen: 3
UL-keurmerk: UL 2238; cURus
Type contact / Geslacht: female
Afscherming: Unshielded
UL-kabeltype: AWM: 20549
UL-bestand: E315587
Draadisolatiemateriaal: PP
RoHS-conform: yes
Producttype: Assemblies & Patch cords
Productsubfamilie: 1/2"-20UNF-2B
Productfamillie: Sensor / Actuator Connectors
Producteigenschappen: Very good resistance to oils, coolants, lubricants as well as emulsions;Drag chain sustainability;Very good vibration and shock resistance
Vervuilingsgraad: 3 acc. to DIN EN 60664-1 (VDE 0110-1)
Opmerking beschermingsgraad / IP-classificatie: ** only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.
Nominale spanning (UL): 250 V AC
Nominale spanning: 250 V
Nominale impuls-spanning: 2.5 kV
Nominale stroom*: 4 A
Nominale stroom (UL)*: 4 A
Beschermingsgraad / IP-classificatie**: IP65, IP67, IP69K
Kleur contacthouder: black
Kabelnummer: 226
Kabellengte: 2 m
Codering: U (1/2"-20UNF-2B)
Contact basismateriaal (#1): CuSn
Connectortype: Cordset, single ended
Connectorontwerp: angled
Geleidermateriaal: Cu
Geleidergrootte: 0.5 mm²
Materiaal kabelmantel: PUR
Kleur kabelmantel: black
Omgevingstemperatuur (flexibele installatie): - 25 °C - + 105 °C (UL: + 80 °C)
Omgevingstemperatuur (vaste installatie): - 50 °C - + 105 °C (UL: + 80 °C)
Omgevingstemperatuur (drag chain installatie): - 25 °C - + 60 °C
Omgevingstemperatuur (bedrijf)*: - 40 °C - + 90 °C
Kabeldiameter D: ø 4.6 ± 0.20 mm
Kabeleigenschappen: Good microbes and hydrolysis resistance; Mainly plasticizer diffusion free; Exclusion of PVC and silicone; Coldness flexibility; Free of lacquer wetting disturbing substances
Bevestigingstype: Coupling Nut
Oppervlaktebehandeling bevestiging: Nickel-plated
Bevestigingsmateriaal: CuZn
Goedkeuringen: UL-approved
Lange omschrijving (#1): 1/2"-20UNF-2B Sensor/Actuator Single-Ended Cordset: Female, angled, 3-pin, U-coded, orange body, 230 V AC/DC, 4 A; PUR black cable, 3-wires, 0.50 mm²
Halogeenvrij:
Afdichtingsmateriaal: FKM
Brandbaarheidsklasse (vormdeel): UL 94 HB
Brandbaarheidsklasse (contacthouder): UL 94 HB
Artikelomschrijving: RKWT 3U-226/2 M
Isolatieweerstand kabel: min 1000 MOhm x km
Isolatieweerstand: ˃ 10^9 Ohm
Geïsoleerde draaddiameter: ø 1.50 mm
Brandbaarheidsklasse (kabelmantel): DIN EN 50265-2-2, VDE 0482-265-2-2, IEC 60332-2-2, CSA FT2
Contactweerstand: ≤ 10 mOhm
Contactcoating: Cu/Au
Materiaal contacthouder (#1): TPU
Buigcycli: ˃ 5 M
Aandraaimoment (bevestiging): M 12x1: (50-60) Ncm, hand-tight
Torsiecycli: ˃ 5 M @ ± 360 °/1 m
Uniek Nr.: aut80489